From: Ricardo Soria Date: Tue, 30 Nov 2004 02:07:43 +0000 Subject: Re: [LARTC] SEPARATING VOIP AND SURFING Message-Id: <20041130020743.45688.qmail@web41523.mail.yahoo.com> List-Id: References: <20041109175203.11372.qmail@web41524.mail.yahoo.com> In-Reply-To: <20041109175203.11372.qmail@web41524.mail.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org --- Andy Furniss escribi=F3:=20 > Ricardo Soria wrote: > > --- Andy Furniss > > escribi=F3:=20 > >=20 > >>Andy Furniss wrote: > >> > >> > >>>>So, my question would be, how to 'divide' or > >>>>'recognize' incoming and outgoing traffic, and > to > >>>>treat it as different channels?? I was thinking > >> > >>about > >> > >>>>using a IMQ device for incoming traffic, but > this > >>>>apperas to be a 'little bit' more complicated > >> > >>that > >> > >>>>what I expected. So, may it be a way to do this > >>>>without installing IMQ ?? > >>> > >>> > >>>Yes you will need IMQ. > >> > >>Second thoughts - you may be able to do without > IMQ > >>as long as it's just=20 > >>forwarded traffic. > >> > >>Andy. > >> > >>=20 > >=20 > >=20 > > Andy: > >=20 > > What I am exactly doing is this: I receive all > > traffic from the cisco 1600, then, > > filter/shape/monitor it, then, if this traffic is > > destined to the remote subnet, it is send to the > cisco > > 827, but, if the traffic is for the local subnet > > (including both ciscos, and the linux box), >=20 > The only thing you would need IMQ for is if you need > to shape traffic=20 > from the 1600 to a local process on the linux box - > so you may - it=20 > depends on what else you are running on the shaping > box that causes bulk=20 > traffic to it. >=20 >=20 > it is > > directly delivered to its destination. All of > this is > > done via eth0, as much outgoing as incoming > traffic.=20 > > So, specially cosidering about the local subnet, > do > > you think I should definitively use IMQ or not?? >=20 > If eth0 has as much incoming as outgoing then there > is no traffic to=20 > local process? >=20 There may be traffic for a local (linux box) process, but the most of the traffic will be redirected or passed. > Do you want to shape eth0 aswell as the internet > link or is it OK for=20 > spare bandwidth? >=20 I cannot translate/understand perfectly this question, but I do need to shape the internet link. So, returning to the question that originated this discussion, how can I diferentiate/separate incoming and outgoing traffic for the same interface (eth0), without confusing each other, and without using IMQ devices if possible ?? > Andy. >=20 >=20 > >=20 > > However, I have also posted in linuximq list, > because > > I cannot find IMQ patch for my linux box (Redhat > 7.3, > > 2.4.18-3 Kernel) > >=20 > > Very thanks in advance. > >=20 > > Ricardo. > >=20 > > > _________________________________________________________ > > Do You Yahoo!? > > Informaci=F3n de Estados Unidos y Am=E9rica Latina, en > Yahoo! Noticias. > > Vis=EDtanos en http://noticias.espanol.yahoo.com > >=20 >=20 >=20 > =20 _________________________________________________________ Do You Yahoo!? Informaci=F3n de Estados Unidos y Am=E9rica Latina, en Yahoo! Noticias. Vis=EDtanos en http://noticias.espanol.yahoo.com _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/