From: Wolfgang Denk <wd@denx.de>
Date: Tue, 21 Dec 2004 10:25:39 +0100
Subject: [U-Boot-Users] A problem with u-boot on smdk2410 used nand flash(smart media card) 
In-Reply-To: Your message of "Tue, 21 Dec 2004 13:09:24 +0800."
             <70882d0604122021091dc76868@mail.gmail.com> 
Message-ID: <20041221092544.3CF79C1430@atlas.denx.de>
List-Id: <u-boot.lists.denx.de>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: u-boot@lists.denx.de

In message <70882d0604122021091dc76868@mail.gmail.com> you wrote:
>
> I have a problem with u-boot on smdk2410, i used a nand flash(smart media card).
> I had make an "u-boot.bin " image, and download with jtag to the nand
> flash. But, that was no any out put signal on the screen.

What makes you think that this should work?

> Where can I find the header file for smdk2410 with nand flash?

Create one.

> or How can i find make such definition for nand flash? and where
> should i add such definition?

Have a look at what other boards with NAND support are doing, try  to
understand this, and then copy and adapt these settings.

For a start, I recommend to RTFM (see doc/README.nand).

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
It is necessary to have purpose.
	-- Alice #1, "I, Mudd", stardate 4513.3