From: Stef Coene Date: Wed, 22 Dec 2004 10:40:04 +0000 Subject: Re: [LARTC] Shaping over multiple outgoing interfaces Message-Id: <200412221140.04458.stef.coene@docum.org> List-Id: References: <20041220222127.15388.qmail@web25210.mail.ukl.yahoo.com> In-Reply-To: <20041220222127.15388.qmail@web25210.mail.ukl.yahoo.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Monday 20 December 2004 23:21, Miguel Sanz wrote: > Hi, > > I've a router configuration with a dsl connection and two ethernet NICs. > How can I control the traffic of the dsl connection when then destination > of the traffic can go out of the router using two diferent interfaces? > > ppp -- router --- lan > > DMZ > > I've read that the solution could be IMQ, but i prefer to not to patch > kernel and iptables. Any suggestions? You can use a second machine: pppp -> shaper > router-> lan | DMZ The shaper can be a bridge so you don't have to change your network setup. Stef --=20 stef.coene@docum.org =A0"Using Linux as bandwidth manager" =A0 =A0 =A0http://www.docum.org/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/