From: Stef Coene Date: Tue, 28 Dec 2004 19:22:49 +0000 Subject: Re: [LARTC] Newb question: tc shedulers on 2 interfaces Message-Id: <200412282022.49327.stef.coene@docum.org> List-Id: References: <1104255997.9531.25.camel@vhost.sourceforge.net> In-Reply-To: <1104255997.9531.25.camel@vhost.sourceforge.net> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org On Tuesday 28 December 2004 18:46, Patrich Bj=F6rklund wrote: > Hi all! I'm new to this list, and hope for some clarity in this matter: > > I have a home-gateway with linux-2.6.9 and iproute2 (ver:2.6.9). My > following tc syntaxes. > > # eth0 internet scheduleing are: > > tc qdisc add dev eth0 root handle 1: htb default 20 > > tc class add dev eth0 parent 1: classid 1:1 htb rate 512kbit burst 6k > tc class add dev eth0 parent 1:1 classid 1:10 htb rate 512kbit burst 6k > prio 1 > tc class add dev eth0 parent 1:1 classid 1:20 htb reate 9*512/10kbit > burst 6k prio 2 > > tc qdisc add dev eth0 parent 1:10 handle 10: sfq perturb 10 > tc qdisc add dev eth0 parent 1:20 handle 20: sfq perturb 10 > > tc filter add dev eth0 parent 1:0 protocol ip prio 10 u32 match ip tos > 0x10 0xff flowid 1:10 > tc filter add dev eth0 parent 1: protocol ip prio 10 u32 \ > match ip protocol 6 0xff \ > match u8 0x50 0x0f at 0 \ > match u16 0x0000 0xffc0 at 2 \ > match u8 0x10 0xff at 33 \ > flowid 1:10 > > tc qdisc add dev dev eth0 handle ffff: ingress > > tc filter add dev eth0 parent ffff: protocol ip prio 50 u32 \ > match ip src 0.0.0.0/0 police rate 2200kbit burst 10k drop flowid :1 > > # My eth1 schedule: > tc qdisc add dev eth1 root tbf rate 512kbit latency 50ms burst 10000 > > The long eth0 tc-script is fetched externally as you may see...but: > > This have worked well for me (no, really) but...since I am a newbee, I > have read the lartc doc, and understood some but very much was really > hard to get...especially the class and filter stuff. Lets say it's not a > 'for dummies' book :) No complainig. My Q are, is there a chance I will > get packet losses or other messes to gateway(eth1/eth0) if I have no > rule set for my LAN-PC:s? Or the above scripts for that matter...Should > I have a 'eth1 tc-command here?' Or any advice or comment would be > greatly appreciated. There are no real errors in your script. Of course, each script can be tun= ed. =20 Some remarks: - you are only shaping traffic leaving eth0, if you add class/filters to et= h1,=20 you can also shaping traffic leaving eth1 - you are shaping traffic leaving eth1 because you are shaping traffic=20 entering eth0 with the ingress qdisc. but using htb/cbq for shaping gives = you much more control. - try http://docum.org/ for other/more information. Stef _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/