From: "Rio Martin." Date: Wed, 19 Jan 2005 03:40:23 +0000 Subject: [LARTC] Confuse, putting packets in wrong mangle table. Message-Id: <200501191032.17988.rio@martin.mu> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Folks, I am a little bit confuse in how to put these packets into correct mangle table for traffic shaping. This is what i ve planned to do: - - - - :eth0 [ LINUX-BOX ] eth1: - - - - Let say: eth0: 220.100.1.1 eth1: 192.168.1.1 eth1:1 192.168.1.2 192.168.1.0/24 get natted into 220.100.1.1 before reaching the internet. I put every packets coming from internet (eth0) this way: # iptables -t mangle -I PREROUTING -i eth0 .. * * * * But what if i would like to do the same way with ip 192.168.1.1 and 192.168.1.2 ? How to put the packets in correct mangle table? Thanks before .. Regards, Rio Martin. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/