From: Dominik Brodowski Subject: Re: kernel: acpi-cpufreq: Transition failed Date: Fri, 4 Feb 2005 21:27:34 +0100 Message-ID: <20050204202734.GA8030@dominikbrodowski.de> References: <200502021158.26890.clemenso@sbox.tugraz.at> <200502021158.26890.clemenso@sbox.tugraz.at> <200502041126.58413.clemenso@sbox.tugraz.at> Mime-Version: 1.0 Content-Disposition: inline In-Reply-To: <200502021158.26890.clemenso@sbox.tugraz.at> <200502041126.58413.clemenso@sbox.tugraz.at> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Clemens Orthacker Cc: cpufreq@lists.linux.org.uk Hi, On Wed, Feb 02, 2005 at 11:58:26AM +0100, Clemens Orthacker wrote: > Since I'm using the 2.6.10 kernel Did it work correctly when you used earlier kernels than 2.6.10? Even if using powernowd? > I constantly get the following error: > kernel: acpi-cpufreq: Transition failed > > Pentium4 M > acpi-cpufreq driver (userspace governor, powernowd) > > Is this a configuration problem? If speedstep-ich works, you should use that module instead -- other than that, this doesn't look like a configuration problem. The BIOS tells us how the kernel should ask it for CPU frequency changes; the kernel does it, but then the BIOS simply reports "error". It might be that the BIOS does provide the kernel with wrong information on what the return value means -- i.e. the kernel thinks it is an error, but in reality it isn't. What chipset does your notebook use (plain "lspci" output, please)? > (btw. bogomips fails, and I have no idea why..) I'll investigate that. Dominik