From: Dominik Brodowski Subject: Re: kernel: acpi-cpufreq: Transition failed Date: Sat, 5 Feb 2005 11:53:59 +0100 Message-ID: <20050205105359.GA7917@dominikbrodowski.de> References: <200502021158.26890.clemenso@sbox.tugraz.at> <200502041126.58413.clemenso@sbox.tugraz.at> <20050204202734.GA8030@dominikbrodowski.de> <200502050925.11480.clemenso@sbox.tugraz.at> Mime-Version: 1.0 Content-Disposition: inline In-Reply-To: <200502050925.11480.clemenso@sbox.tugraz.at> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Clemens Orthacker Cc: cpufreq@lists.linux.org.uk On Sat, Feb 05, 2005 at 09:25:11AM +0100, Clemens Orthacker wrote: > Am Freitag, 4. Februar 2005 21:27 schrieb Dominik Brodowski: > > > Did it work correctly when you used earlier kernels than 2.6.10? Even if > > using powernowd? > > Yes. At least there were no error messages. (2.6.9) This is most interesting. There have been the following changes between 2.6.9 and 2.6.10 relating to the acpi-cpufreq module: - [core,drivers] add cpumask_t cpus for better SMT or CPU groups handling => this is non-HT, so unrelated - [acpi-io] rename acpi.c to acpi-cpufreq.c => this _can't_ do any harm - [acpi-cpufreq] debug modifications and advancements => I doubt this has any effect - [acpi-cpufreq] fix x86_64 symlink breakage [Dave Jones] => wrong architecture - [acpi-perflib] disable SMM access to SpeedStep using ACPI-FADT pstate_cnt => so this is what's left over. Could you remove the line in arch/i386/kernel/cpu/cpufreq/acpi-cpufreq.c which states: acpi_processor_notify_smm(THIS_MODULE); recompile, re-install, and re-test, please? > > If speedstep-ich works, you should use that module instead -- > > I don't have a Intel chipset, so I thought I should use acpi-cpufreq. That's correct. Dominik