From: =?iso-8859-1?Q?Rog=E9rio?= Brito Subject: irq 10: nobody cared! (was: Re: 2.6.11-rc3-mm1) Date: Sat, 5 Feb 2005 20:45:58 -0200 Message-ID: <20050205224558.GB3815@ime.usp.br> References: <20050204103350.241a907a.akpm@osdl.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Content-Disposition: inline In-Reply-To: <20050204103350.241a907a.akpm@osdl.org> Sender: linux-kernel-owner@vger.kernel.org To: Andrew Morton Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org, B.Zolnierkiewicz@elka.pw.edu.pl List-Id: linux-ide@vger.kernel.org Dear developers, =46or some kernel versions (say, since 2.6.10 proper, all the 2.6.11-rc= 's, some -mm trees and also -ac) I have been getting the message "irq 10: nobody cared!". The message says that I should pass the irqpoll option to the kernel an= d even if I do, I still get the stack trace and the "irq 10: nobody cared= !" message. :-( The message seems to be related to the Promise PDC20265 driver and it appeared right after I moved my HDs from my motherboard's VIA controlle= rs to the Promise controllers. I have an Asus A7V board, with 2 VIA 686a controllers and 2 Promise PDC20265 controllers. I already tried enabling and disabling ACPI, but it seems that the prob= lem just doesn't go away. :-( I am including the dmesg log of my system with this message. I am CC'in= g the linux-ide list, but I'm only subscribed to linux-kernel. I would appreciate CC's, if possible. Thank you very much for any help, Rog=E9rio. P.S.: I am, right now, re-compiling 2.6.11-rc3-mm1 with the extra pass = of kallsyms to see if the problem persists with this release. --=20 =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D= -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D Rog=E9rio Brito - rbrito@ime.usp.br - http://www.ime.usp.br/~rbrito =3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D= -=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D-=3D