From: Konstantin Kletschke Date: Sun, 13 Feb 2005 14:02:16 +0100 Subject: [U-Boot-Users] decrease boot time In-Reply-To: <528646bc05021213026ed990ce@mail.gmail.com> References: <20050211223035.GA10412@ku-gbr.de> <528646bc05021115281ab37f30@mail.gmail.com> <20050212200503.GA11316@ku-gbr.de> <528646bc05021213026ed990ce@mail.gmail.com> Message-ID: <20050213130215.GA13453@synertronixx3> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Am 2005-02-12 14:02 -0700 schrieb Grant Likely: > > Please make sure that you include the mailing list when you reply to me. Oh sorry! I messed up List-Reply and simple Reply again in mutt. Normally I only reply to the mailing list itself :/ > You think? If possible; I would get some hard numbers on your boot > sequence and find out for sure. You could use a serial protocol > analyser to attach timestamps to the boot logs. Make sure you're > optimizing the right things. Yes, its time now to measure all steps of the boot process exactly. The serial analyzer idea is quite good. Why isn't it mine :) > arch/arm/boot/compressed/head.S. You will see a branch to cache_on at > line 287 before decompress_kernel at line 310. (2.6.10) According to > the comment on line 422 the page tables are setup for wherever the > compressed image is; including if it is in FLASH. Yes I see. But I don't understand the assembler code really yet. Do you mean "add r0, r3, r2, lsl #2" by line 422, where addresses above 0x10040000 (there my kernel lives) are added to cacheable area? > To u-boot prompt or to linux prompt? To linux prompt. I heard from a sony demo where an ARM9 based system starts video encoding one second after power up. I asked in linux-arm-kernel last year and some guy mentioned that. So I thought I could reach the prompt also in one second :/ > > > safe to assume that you've got a 'boot loader' flash device with a > > > small first (~16k)? > > > > What do you mean by that? > I mean that some flash devices have some small sectors at the > beginning specifically to hold the boot loader. If you were trying to > save space I wondered if you were trying to fit into a small sector. > This is often done when FLASH space is at an extreme premium. No I have intel 28F128K3 sync burst Flash which contains even sized 128kB sectors only. > Linux can spew a lot of log messages; I suspect your time difference > would be more bounded by the baud rate of the port rather than the > serial device driver itself. U-boot on the other had is quite a bit T thought also and measured and my result is the same. > Can you bump up your baud rate? It is at 115200 now, I could bump it but I don't think it will to significant time saving due to the above reasons... Konsti -- GPG KeyID EF62FCEF Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF