From: Wolfgang Denk Date: Sun, 20 Feb 2005 10:27:30 +0100 Subject: [U-Boot-Users] Problems during board configuration of U-boot1.1.2! In-Reply-To: Your message of "Sat, 19 Feb 2005 19:36:07 PST." <20050220033607.58917.qmail@web13607.mail.yahoo.com> Message-ID: <20050220092735.66EE5C1430@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Why are you posting the same question twice within just 3 minutes? In message <20050220033607.58917.qmail@web13607.mail.yahoo.com> you wrote: > I had just been in porting U-Boot1.1.2 to AMCC's > Bubinga405ep Eval board.But after I had generated I don't understand why you should have to do any porting - the Bubinga board is fully supported in U-Boot. You just have to build it. > make:*** No rule to make target"bubinga405ep_config". > Stop > > I don't know what's wrong with the u-boot,for I had Please get used to the fact that Unix is case-sensitive - check the Makefile if you are in doubt about the correct spelling. In this case, please try: $ make BUBINGA405EP_config ; make Best regards, Wolfgang Denk -- See us @ Embedded World, Nuremberg, Feb 22 - 24, Hall 10.0 Booth 310 Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de The greatest threat towards future is indifference.