From: Bruno Ducrot Subject: [ducrot@poupinou.org: Re: CPU Frequency daemon: no cpufreq interface found.] Date: Fri, 6 May 2005 14:41:59 +0200 Message-ID: <20050506124159.GF21800@poupinou.org> Mime-Version: 1.0 Return-path: Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: cpufreq@lists.linux.org.uk Forgot to CC to cpufreq ML, sorry. ----- Forwarded message from Bruno Ducrot ----- Envelope-to: ducrot@poupinou.org To: Fredrik Eriksson Subject: Re: CPU Frequency daemon: no cpufreq interface found. From: Bruno Ducrot On Fri, May 06, 2005 at 02:03:15PM +0200, Fredrik Eriksson wrote: > On Friday 06 May 2005 10:09, you wrote: > > On Fri, May 06, 2005 at 12:19:04AM +0200, Fredrik Eriksson wrote: > > > having problems with my Armada M700 pIII 800mhz laptop. > > > Ive tired pretty much everything... ive compiled every support for > > > speedstepping into the kernel and it still doesnt show any interfaces. > > > the sysfs doesnt show and devices in /sys/devices/system/cpu/cpu0/ > > > > > > and i cant see any evidence in my dmesg that CPU scaling is loaded > > > > > > Anyone tried running speedstep on a Armada M700 that might be able to > > > help? > > > > > > here's a "dmesg > dmesg.txt" if that will help you find my problem > > > http://www.snuttefilt.org/~sajko/dmesg.txt > > > > Could you try to build speedstep-smi as a module and do something like > > this: > > > > modprobe speedstep-smi smi_port=0xb2 smi_cmd=0x82 smi_sig=1 > > > > Please do it with debug things as pointed by Dominik. > > > > Cheers, > > okey... this was wierd :P i tried to load the module when i got back into X. > and then it said no device found... then i tried like 2 minutes later (cause > i was gonna copy/paste what it said here) and then it off some unknown reason > worked... so i guess i dont have to do anything more... it still says no > cpufreq interface when i boot. but i can live with having to load the module > when i need to use speedstep, thx for the help thou guys :) You can try a boot kernel parameter instead. It should be something like this (not tested): speedstep_smi.smi_port=0xb2 speedstep_smi.smi_cmd=0x82 speedstep_smi.smi_sig=1 this should work only if speedstep-smi is compiled in-kernel (not as a module). It is just more easy to check if parameters work with modules you know ;) Cheers, -- Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care. ----- End forwarded message ----- -- Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care.