From: "Arkadiusz Binder" Date: Wed, 18 May 2005 07:41:15 +0000 Subject: Re: [LARTC] problem with the "arp" command (using the pub flag) Message-Id: <20050518074109.60D27EE988@tx.pl> List-Id: References: <428A218F.4010902@iit.cnr.it> In-Reply-To: <428A218F.4010902@iit.cnr.it> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org and what shows #ip ro sh cache ? It might be that you have not arp of some host who respond for icmp and arp's in case of some recieved icmp redirect packet. -----Original Message----- From: "gypsy" Sent: 05-05-18 05:27:02 To: "Antonio Pinizzotto" Cc: "lartc@mailman.ds9a.nl" Subject: Re: [LARTC] problem with the "arp" command (using the pub flag) Antonio Pinizzotto wrote: > ___PROBLEM___ > > The problems is that, sometimes, the second line (the one with the P > Flag in the "arp -n" output) desappears for some time and then appears > again... !!? > > Note. > Do you know if it is normal or if it could be a bug in "arp"? > I didn't verify if, when the second line is not present, the host A > continues to answer to ARP Request for 192.168.30.130 on eth0. > In other words I didn't verify if it's just a problem in the output (of > "arp -n" command) and not in the behaviour. > > Antonio You got Trouble, Antonio! I've been running for 2+ months with no "disappearing" PUB arps. arp -n works flawlessly. Wondering: Could it be a bad NIC or cable? -- gypsy _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc