From: Andrew Morton Subject: Re: nforce 4 audio has no s/pdif out Date: Wed, 25 May 2005 17:31:13 -0700 Message-ID: <20050525173113.16253b80.akpm@osdl.org> References: <20050325012931.GA30885@codeblau.de> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <20050325012931.GA30885@codeblau.de> Sender: alsa-devel-admin@lists.sourceforge.net Errors-To: alsa-devel-admin@lists.sourceforge.net List-Unsubscribe: , List-Post: List-Help: List-Subscribe: , List-Archive: To: Felix von Leitner Cc: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org Felix von Leitner wrote: > > My shiny new nforce 4 main board has sound that is detected OK by ALSA: > > intel8x0_measure_ac97_clock: measured 49970 usecs > intel8x0: clocking to 46877 > ALSA device list: > #0: NVidia CK804 with ALC850 at 0xd2003000, irq 185 > > but I can't get my stereo to play. It is connected via optical S/PDIF. > Works fine under Windoze, so the hardware is ok. > > Any idea what I could do? Felix, is this problem still present in 2.6.12-rc5? Thanks. ------------------------------------------------------- SF.Net email is sponsored by: GoToMeeting - the easiest way to collaborate online with coworkers and clients while avoiding the high cost of travel and communications. There is no equipment to buy and you can meet as often as you want. Try it free.http://ads.osdn.com/?ad_id=7402&alloc_id=16135&op=click