From: Fredrik Bredeli Date: Fri, 22 Jul 2005 02:27:36 +0000 Subject: [LARTC] tc filter matching anything Message-Id: <20050722022736.GA21450@cocacolic.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hey, I have a problem adding a filter matching anything, here is my setup: ############### tc qdisc add dev eth0 handle 1: root prio tc qdisc add dev eth0 parent 1:1 handle 10: pfifo tc qdisc add dev eth0 parent 1:2 handle 20: tbf latency 50ms rate \ 128kbit burst 256kbit tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 666 fw \ flowid 1:2 tc filter add dev eth0 protocol ip parent 1:0 prio 2 flowid 1:1 ##################### This is supposed to put all traffic marked by iptables in the tbf qdisc, but the last line gives me this error: error: Unknown filter "flowid", hence option "1:1" is unparsable I'm running Linux 2.4.27-2-686 with iptables v1.2.11 on debian sarge Does anyone know what is wrong, or have a better solution for my setup? Thank you. Fredrik Bredeli _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc