From: bernd.westermann@it-west.de Subject: Re: powernow-k8: overflow on vid write on AMD64 3000 Venice Date: Mon, 29 Aug 2005 13:10:28 +0200 Message-ID: <200508291310.29017.bernd.westermann@it-west.de> References: <200508271748.21052.bernd.westermann@it-west.de> <200508281144.56972.bernd.westermann@it-west.de> <200508281327.03267.bernd.westermann@it-west.de> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <200508281327.03267.bernd.westermann@it-west.de> Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" To: cpufreq@lists.linux.org.uk Hi List, my FAULT. I had tuned my BIOS settings to much ("Load Performance"). Now with "Optimized Settings" all is running fine. Bernd Westermann Am Sonntag, 28. August 2005 13:27 schrieb bernd.westermann@it-west.de: > Hello, > > problem not solved... > > After reboot I get the same errors. I have now patched powernow-k8 to set > maxvid to 0x6 it it is 0x4; After first load of powernow-k8 I get this > output: > > powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3) > powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) > powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) > cpu_init done, current fid 0x9, vid 0x6 > powernow-k8: maxvid false: setting from 0x4 to 0x6 > > Why is fid==0x9, I think it should be 0xa? > > After unloading powernow-k8 and loading a second time: > > powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.3) > powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) > powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) > cpu_init done, current fid 0xa, vid 0x6 > > I get this result only with my patched powernow-k8.c. Trying to load the > unpatched powernow-k8 make no difference. Both times he tells me fid==0x9. > > Regards > > Bernd > > Am Sonntag, 28. August 2005 11:44 schrieb bernd.westermann@it-west.de: > > Hello List, > > > > problem solved. I patch the linux-2.6.12.5 kernel with the latest > > powernow-k8 driver from AMD. It will be in 2.6.13 by default. > > > > Bernd > > > > Am Samstag, 27. August 2005 17:48 schrieb bernd.westermann@it-west.de: > > > Hello List, > > > > > > powernow-k8 does not run on my AMD 64 3000 Venice CPU. If I try to set > > > performance governor, I get the following error: > > > > > > powernow-k8: internal error - overflow on vid write > > > powernow-k8: internal error - overflow on vid write > > > > > > Reason: He wants to set VID=0x6 but he gets maxvid=0x4 from > > > MSR_FIDVID_STATUS. So it changed reqvid to 0x4 a nd I get these error. > > > > > > At the beginning powernow-k8 tells: > > > powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version > > > 1.40.4) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 (1400 mV) > > > powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) > > > cpu_init done, current fid 0x9, vid 0x6 > > > > > > After I hardcoded the maxvid to 0x6 all govenors running fine. Is there > > > an wrong value in the processor core? Can we change something in > > > powernow-k8? > > > > > > My System: > > > CPU: AMD64 3000 Venice > > > Mainboard: ECS nforce4-939 > > > Linux: Gentoo 2005.1 64bit > > > Kernel: 2.6.12.5 (2.6.12-gentoo-r9) > > > > > > > > > Best regards > > > > > > Bernd > > > > > > _______________________________________________ > > > Cpufreq mailing list > > > Cpufreq@lists.linux.org.uk > > > http://lists.linux.org.uk/mailman/listinfo/cpufreq > > > > _______________________________________________ > > Cpufreq mailing list > > Cpufreq@lists.linux.org.uk > > http://lists.linux.org.uk/mailman/listinfo/cpufreq > > _______________________________________________ > Cpufreq mailing list > Cpufreq@lists.linux.org.uk > http://lists.linux.org.uk/mailman/listinfo/cpufreq