From: Evgeniy Polyakov Subject: [1/1] OSF: small documentation update. Date: Sat, 10 Dec 2005 00:43:14 +0300 Message-ID: <20051209214314.GA21647@2ka.mipt.ru> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Cc: Harald Welte , PatriK McHardy Return-path: To: netfilter-devel@lists.netfilter.org Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: netfilter-devel-bounces@lists.netfilter.org Errors-To: netfilter-devel-bounces@lists.netfilter.org List-Id: netfilter-devel.vger.kernel.org Signed-off-by: Evgeniy Polyakov Index: patch-o-matic-ng/patchlets/osf/help =================================================================== --- patch-o-matic-ng/patchlets/osf/help (revision 6310) +++ patch-o-matic-ng/patchlets/osf/help (working copy) @@ -30,8 +30,13 @@ OSF will use initial TTL only if source of connection is in our local network. --netlink - If present, OSF will log all events also through netlink NETLINK_NFLOG groupt 1. + If present, OSF will log all events also through netlink NETLINK_NFLOG group 1. + --connector + 2.6.14+ only. + If present, OSF will log all events also through netlink connector(1.0 id). + More about connector can be found in Documentation/connector in kernel source tree. + Fingerprints can be loaded and read through /proc/sys/net/ipv4/osf file. One can flush all fingerprints with following command: echo -en FLUSH > /proc/sys/net/ipv4/osf -- Evgeniy Polyakov