From: Peter Surda Date: Sat, 23 Jul 2005 15:57:08 +0000 Subject: Re: [LARTC] Multiple ISP Provider on one interface Message-Id: <20056231757826735@mail.routehat.org> List-Id: References: <42E2597F.1020808@hotmail.com> In-Reply-To: <42E2597F.1020808@hotmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Sat, 23 Jul 2005 15:51:43 +0100 ZeuS SN wrote: >The problem is that I have only 2 ethernet adapters in my linux router, >one of this adapter pluged to the LAN and the other is pluged to a HUB >who have 2 routers DSL. Each DSL routers have an static ip and the >solution that I found was creating an eth0 and eth0:1 but with this >option I have any way to use the eth0:1 adapte... You don't have to use eth0:1, it is actually considered obsolete since kernel 2.2. Use ip addr add ip1/mask1 dev eth0 ip addr add ip2/mask2 dev eth0 As far as I know, modern distributions support this, although I am not sure about the exact syntax in their configuration files. In Shurdix I do it like this: http://docs.shurdix.org/shurdix:network_interfaces#ip >Regards. Yours sincerely, Peter _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc