From: arvidjaar@newmail.ru (Andrey Borzenkov) Date: Sat, 14 Jan 2006 19:23:32 +0000 Subject: [lm-sensors] 2.6.15: lm90 0-004c: Register 0x13 read failed (-1) Message-Id: <200601142223.35838.arvidjaar@newmail.ru> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@lm-sensors.org Cc: linux-kernel@vger.kernel.org -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Vanilla 2.6.15 on Toshiba Portege 4000. I get constant messages in dmesg: i2c_adapter i2c-0: Error: command never completed lm90 0-004c: Register 0x1 read failed (-1) i2c_adapter i2c-0: Error: command never completed lm90 0-004c: Register 0x14 read failed (-1) i2c_adapter i2c-0: Error: command never completed lm90 0-004c: Register 0x8 read failed (-1) i2c_adapter i2c-0: Error: command never completed lm90 0-004c: Register 0x0 read failed (-1) for quite a number of registers. Apparently I can read sensors just fine still I am uneasy seeing those. {pts/1}% lspci 00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01) 00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller 00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) 00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3) 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 01) 00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV] 00:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] 00:0a.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08) 00:10.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 01) 00:11.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 32) 00:11.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus Bridge with ZV Support (rev 32) 00:12.0 System peripheral: Toshiba America Info Systems SD TypA Controller (rev 03) 01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev 82) {pts/1}% sensors eeprom-i2c-0-50 Adapter: SMBus ALI1535 adapter at ef00 Memory type: SDR SDRAM DIMM Memory size (MB): 256 adm1032-i2c-0-4c Adapter: SMBus ALI1535 adapter at ef00 M/B Temp: +43?C (low = -65?C, high = +127?C) CPU Temp: +47.6?C (low = +43.0?C, high = +51.0?C) ALARM M/B Crit: +127?C (hyst = +122?C) CPU Crit: +100?C (hyst = +95?C) - -andrey -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFDyU+3R6LMutpd94wRAhIpAJ9jAaVmEx6v3FF5f7pDvmD/Xu7GnQCeO/5O RSvVH1lgezCRTdrAQdLD0js=i2dt -----END PGP SIGNATURE-----