From: khali@linux-fr.org (Jean Delvare) Date: Wed, 18 Jan 2006 21:53:09 +0000 Subject: [lm-sensors] [PATCH 08/17] i2c: scx200_acb minimal documentation Message-Id: <20060118225309.708129dd.khali@linux-fr.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org From: Ben Gardner Content-Disposition: inline; filename=i2c-scx200_acb-07-docs.patch scx200_acb: Minimal documentation update Signed-off-by: Ben Gardner Signed-off-by: Jean Delvare --- Documentation/i2c/busses/scx200_acb | 5 +++-- drivers/i2c/busses/Kconfig | 5 +++-- 2 files changed, 6 insertions(+), 4 deletions(-) --- linux-2.6.15-git.orig/Documentation/i2c/busses/scx200_acb 2006-01-08 19:26:27.000000000 +0100 +++ linux-2.6.15-git/Documentation/i2c/busses/scx200_acb 2006-01-11 20:22:55.000000000 +0100 @@ -6,9 +6,10 @@ ----------------- * base: int - Base addresses for the ACCESS.bus controllers + Base addresses for the ACCESS.bus controllers on SCx200 and SC1100 devices Description ----------- -Enable the use of the ACCESS.bus controllers of a SCx200 processor. +Enable the use of the ACCESS.bus controller on the Geode SCx200 and +SC1100 processors and the CS5535 and CS5536 Geode companion devices. --- linux-2.6.15-git.orig/drivers/i2c/busses/Kconfig 2006-01-11 20:08:39.000000000 +0100 +++ linux-2.6.15-git/drivers/i2c/busses/Kconfig 2006-01-11 20:22:55.000000000 +0100 @@ -389,10 +389,11 @@ also be specified with a module parameter. config SCx200_ACB - tristate "NatSemi SCx200 ACCESS.bus" + tristate "Geode ACCESS.bus support" depends on I2C && PCI help - Enable the use of the ACCESS.bus controllers of a SCx200 processor. + Enable the use of the ACCESS.bus controllers on the Geode SCx200 and + SC1100 processors and the CS5535 and CS5536 Geode companion devices. If you don't know what to do here, say N. -- Jean Delvare