From: bugme-daemon@bugzilla.kernel.org Subject: [Bug 5985] speedstep-smi not detecting speedstep-capability with early Pentium 3 Coppermine Date: Tue, 31 Jan 2006 22:48:23 -0800 Message-ID: <200602010648.k116mNT0001660@fire-2.osdl.org> Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org+glkc-cpufreq=m.gmane.org@lists.linux.org.uk MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: cpufreq@www.linux.org.uk http://bugzilla.kernel.org/show_bug.cgi?id=5985 ------- Additional Comments From zarhan@cs.tut.fi 2006-01-31 22:48 ------- With the suggested parameters, I get speedstep-lib: x86: 6, model: 8 speedstep-lib: Coppermine: MSR_IA32_EBL_CR_POWERON is 0x4c080020, 0x0 speedstep-lib: Coppermine: MSR_IA32_PLATFORM ID is 0x0, 0x540000 speedstep-lib: early PIII version speedstep-smi: signature:0x00008680, command:0x0000e6f5, event:0x00000000, perf_level:0x47534943. cpufreq-core: trying to register driver speedstep-smi cpufreq-core: adding CPU 0 speedstep-smi: trying to obtain ownership with command 47534982 at port b2 speedstep-smi: result is 0 speedstep-smi: bug #1422 -- can't read freqs from BIOS speedstep-smi: could not detect low and high frequencies by SMI call. speedstep-lib: trying to determine both speeds speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x4c080020 0x0 speedstep-lib: workaround for early PIIIs speedstep-lib: speed is 500000 speedstep-lib: previous speed is 500000 speedstep-smi: trying to set frequency to state 1 with command 47534982 at port b2 speedstep-smi: retry 1, previous result 0, waiting... speedstep-smi: retry 2, previous result 0, waiting... speedstep-smi: retry 3, previous result 0, waiting... speedstep-smi: retry 4, previous result 0, waiting... speedstep-smi: retry 5, previous result 0, waiting... cpufreq: change failed with new_state 2 and result 0 speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x4c080020 0x0 speedstep-lib: workaround for early PIIIs speedstep-lib: speed is 500000 speedstep-lib: low speed is 500000 speedstep-smi: trying to set frequency to state 0 with command 47534982 at port b2 speedstep-smi: retry 1, previous result 0, waiting... speedstep-smi: retry 2, previous result 0, waiting... speedstep-smi: retry 3, previous result 0, waiting... speedstep-smi: retry 4, previous result 0, waiting... speedstep-smi: retry 5, previous result 0, waiting... cpufreq: change failed with new_state 2 and result 0 speedstep-lib: P3 - MSR_IA32_EBL_CR_POWERON: 0x4c080020 0x0 speedstep-lib: workaround for early PIIIs speedstep-lib: speed is 500000 speedstep-lib: high speed is 500000 speedstep-smi: could not detect two different speeds -- aborting. cpufreq-core: initialization failed cpufreq-core: no CPU initialized for driver speedstep-smi cpufreq-core: unregistering CPU 0 The 500 MHz speed is correct, but that's about it. I don't have MS Windows available right now, but I'll try that out. Thanks for the tips. ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.