From: bugme-daemon@bugzilla.kernel.org Subject: [Bug 6005] New: can't change cpu frequency on pentium M Date: Fri, 3 Feb 2006 13:28:56 -0800 Message-ID: <200602032128.k13LSuEG010206@fire-2.osdl.org> Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org+glkc-cpufreq=gmane.org@lists.linux.org.uk MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: cpufreq@www.linux.org.uk http://bugzilla.kernel.org/show_bug.cgi?id=6005 Summary: can't change cpu frequency on pentium M Kernel Version: 2.6.16-rc2 Status: NEW Severity: blocking Owner: cpufreq@www.linux.org.uk Submitter: nahoo82@terra.es Most recent kernel where this bug did not occur: 2.6.16-rc1 Distribution: Debian Sid Hardware Environment: dmesg I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: After all inits, caps: afe9fbff 00100000 00000000 00000040 00000180 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1.86GHz stepping 08 Checking 'hlt' instruction... OK. ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 2064k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfd944, last bus=7 PCI: Using MMCONFIG ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] ACPI Error (nsxfeval-0242): Handle is NULL and Pathname is relative [20060127] ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO PCI quirk: region 1180-11bf claimed by ICH6 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 PCI: Transparent bridge - 0000:00:1e.0 PCI: Bus #07 (-#0a) may be hidden behind transparent bridge #06 (-#07) (try 'pci=assign-busses') ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15) ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 10 devices PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0xfe00-0xfe7f has been reserved pnp: 00:01: ioport range 0xfe80-0xfeff has been reserved pnp: 00:01: ioport range 0xff00-0xff7f has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1c.0 IO window: 3000-3fff MEM window: b4000000-b7ffffff PREFETCH window: d0000000-d3ffffff PCI: Bus 7, cardbus bridge: 0000:06:04.0 IO window: 00004000-000040ff IO window: 00004400-000044ff PREFETCH window: 50000000-51ffffff MEM window: 54000000-55ffffff PCI: Bridge: 0000:00:1e.0 IO window: 4000-4fff MEM window: b8000000-b80fffff PREFETCH window: 50000000-51ffffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177 Simple Boot Flag at 0x36 set to 0x1 audit: initializing netlink socket (disabled) audit(1139004474.691:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler cfq registered (default) ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] Allocate Port Service[0000:00:1c.0:pcie02] Allocate Port Service[0000:00:1c.0:pcie03] vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 3072k, total 7872k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at 00ff:44f0 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 201 ACPI: PCI interrupt for device 0000:00:1e.3 disabled RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Feb 3 2006 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered ieee80211: 802.11 data/management/control stack, git-1.1.7 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' Using IPI Shortcut mode ACPI wakeup devices: RP01 USB1 USB2 USB3 USB4 USB7 MODM ACPI: (supports S0 S3 S4 S5) Freeing unused kernel memory: 168k freed usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 209, io base 0x00001820 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 217, io base 0x00001840 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 225 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 225, io base 0x00001860 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb 1-1: new full speed USB device using uhci_hcd and address 2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 177, io base 0x00001880 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb 1-1: configuration #1 chosen from 1 choice hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected input: AT Translated Set 2 keyboard as /class/input/input0 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 209 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: irq 209, io mem 0xb0040000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 1-1: USB disconnect, address 2 usbcore: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver mice: PS/2 mouse device common for all mice SCSI subsystem initialized libata version 1.20 loaded. ata_piix 0000:00:1f.2: version 1.05 ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 217 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14 ata1: dev 0 cfg 49:0f00 82:746b 83:7fe8 84:4023 85:f469 86:3c48 87:4023 88:203f ata1: dev 0 ATA-6, max UDMA/100, 156301488 sectors: LBA48 ata1(0): applying bridge limits ata1: dev 0 configured for UDMA/100 scsi0 : ata_piix Vendor: ATA Model: IC25N080ATMR04-0 Rev: MO4O Type: Direct-Access ANSI SCSI revision: 05 ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15 usb 1-1: new full speed USB device using uhci_hcd and address 3 ata2: dev 0 cfg 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 ata2: dev 0 ATAPI, max UDMA/33 ata2(0): applying bridge limits ata2: dev 0 configured for UDMA/33 scsi1 : ata_piix Vendor: MATSHITA Model: DVD-RAM UJ-831S Rev: 1.40 Type: CD-ROM ANSI SCSI revision: 05 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back usb 1-1: configuration #1 chosen from 1 choice SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB) hub 1-1:1.0: USB hub found sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back hub 1-1:1.0: 4 ports detected sda: sda1 sda2 < sda5 > sda3 sd 0:0:0:0: Attached scsi disk sda device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled SGI XFS Quota Management subsystem XFS mounting filesystem dm-0 usb 1-1.2: new full speed USB device using uhci_hcd and address 4 Ending clean XFS mount for filesystem: dm-0 usb 1-1.2: configuration #1 chosen from 1 choice input: USB HIDBP Keyboard 05f3:0007 as /class/input/input1 input: HID 05f3:0007 as /class/input/input2 input: USB HID v1.00 Device [HID 05f3:0007] on usb-0000:00:1d.0-1.2 usb 1-1.4: new low speed USB device using uhci_hcd and address 5 usb 1-1.4: configuration #1 chosen from 1 choice input: Logitech USB Trackball as /class/input/input3 input: USB HID v1.10 Mouse [Logitech USB Trackball] on usb-0000:00:1d.0-1.4 NET: Registered protocol family 1 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:02:00.0 to 64 sky2 v0.13 addr 0xb4000000 irq 177 Yukon-FE (0xb7) rev 1 sky2 eth0: addr 00:0f:b0:84:80:56 hw_random: RNG not detected Real Time Clock Driver v1.12ac parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 915GM Chipset. agpgart: Detected 7932K stolen memory. agpgart: AGP aperture is 256M @ 0xc0000000 ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1e.2 to 64 input: PS/2 Mouse as /class/input/input4 input: AlpsPS/2 ALPS GlidePoint as /class/input/input5 ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, git-1.0.8 ipw2200: Copyright(c) 2003-2005 Intel Corporation ieee1394: Initialized config rom entry `ip1394' sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 intel8x0_measure_ac97_clock: measured 50437 usecs intel8x0: clocking to 48000 ACPI: PCI Interrupt 0000:00:1e.3[B] -> GSI 20 (level, low) -> IRQ 201 PCI: Setting latency timer of device 0000:00:1e.3 to 64 ACPI: PCI Interrupt 0000:06:04.0[A] -> GSI 16 (level, low) -> IRQ 177 Yenta: CardBus bridge found at 0000:06:04.0 [1179:ff00] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:06:04.0, mfunc 0x10aa1b22, devctl 0x66 Yenta: ISA IRQ mask 0x0c78, PCI irq 177 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xb80fffff pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x51ffffff ACPI: PCI Interrupt 0000:06:04.2[C] -> GSI 18 (level, low) -> IRQ 225 ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[225] MMIO=[b8008000-b80087ff] Max Packet=[2048] IR/IT contexts=[4/8] ACPI: PCI Interrupt 0000:06:02.0[A] -> GSI 22 (level, low) -> IRQ 233 ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f556940415e] eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3]) ACPI: Battery Slot [BAT1] (battery present) fuse init (API version 7.6) ipw2200: Firmware error detected. Restarting. ipw2200: Sysfs 'error' log captured. XFS mounting filesystem dm-2 ipw2200: Firmware error detected. Restarting. ipw2200: Sysfs 'error' log already exists. Ending clean XFS mount for filesystem: dm-2 NTFS driver 2.1.25 [Flags: R/W MODULE]. NTFS volume version 3.1. NTFS-fs warning (device sda1): load_system_files(): $LogFile is not clean. Will not be able to remount read-write. Mount in Windows. pcmcia: Detected deprecated PCMCIA ioctl usage. pcmcia: This interface will soon be removed from the kernel; please expect breakage unless you upgrade to new tools. pcmcia: see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html for details. hw_random: RNG not detected NET: Registered protocol family 17 ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. ip_conntrack version 2.4 (8119 buckets, 64952 max) - 232 bytes per conntrack Inbound IN=eth1 OUT= MAC=00:12:f0:6d:e2:55:00:03:c9:b4:57:b8:08:00 SRC=85.178.231.253 DST=192.168.2.32 LEN=1480 TOS=0x00 PREC=0x00 TTL=121 ID=10597 DF PROTO=TCP SPT=6974 DPT=39155 WINDOW=65518 RES=0x00 ACK PSH URGP=0 ACPI: AC Adapter [ACAD] (on-line) ACPI: Power Button (FF) [PWRF] ACPI: Lid Switch [LID0] ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). [drm] Initialized drm 1.0.1 20051102 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 177 [drm] Initialized i915 1.4.0 20060119 on minor 0 cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.86GHz stepping : 8 cpu MHz : 1862.249 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss tm pbe nx est tm2 bogomips : 3728.77 Problem Description: The cpu frequency is alwais at maximun, and the aplications that change it doesn't work. There is no /sys/devices/system/cpu/cpu0/cpufreq/ dir. ------- You are receiving this mail because: ------- You are the assignee for the bug, or are watching the assignee.