From: khali@linux-fr.org (Jean Delvare) Date: Sun, 05 Feb 2006 22:17:34 +0000 Subject: [lm-sensors] [PATCH 03/11] w83627hf: Document the reset module Message-Id: <20060205231734.3ec8f2e6.khali@linux-fr.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Content-Disposition: inline; filename=hwmon-w83627hf-document-reset-param.patch Document the reset module parameter which was recently added to the w83627hf driver. Signed-off-by: Jean Delvare --- Documentation/hwmon/w83627hf | 4 ++++ 1 file changed, 4 insertions(+) --- linux-2.6.16-rc2.orig/Documentation/hwmon/w83627hf 2006-02-05 21:09:40.000000000 +0100 +++ linux-2.6.16-rc2/Documentation/hwmon/w83627hf 2006-02-05 21:10:21.000000000 +0100 @@ -36,6 +36,10 @@ (default is 1) Use 'init=0' to bypass initializing the chip. Try this if your computer crashes when you load the module. +* reset: int + (default is 0) + The driver used to reset the chip on load, but does no more. Use + 'reset=1' to restore the old behavior. Report if you need to do this. Description ----------- -- Jean Delvare