From: Wolfgang Denk Date: Sat, 11 Feb 2006 02:21:53 +0100 Subject: [U-Boot-Users] U-boot environment not loading from flash In-Reply-To: Your message of "Fri, 10 Feb 2006 16:52:20 PST." <43ED3544.3040007@quartics.com> Message-ID: <20060211012153.ADA4D3525CC@atlas.denx.de> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de In message <43ED3544.3040007@quartics.com> you wrote: > > I am using latest u-boot with an ARM Integrator/CP board (16MB flash). > Everything is fine except that when I save the environment in the flash > and reboot the system, u-boot restarts with the environment variables it > was compiled with, not what has been saved in the flash sector. I used ... > Any clues anyone?? Sounds as if your system was misconfigured. Best regards, Wolfgang Denk -- Software Engineering: Embedded and Realtime Systems, Embedded Linux Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If you want strict real-time behavior, run in the real time schedu- ling class. But there are no seatbelts or airbags; main(){for(;;);} can hard hang your system. -- Bart Smaalders