From: Andrew Morton Subject: Fw: [Bugme-new] [Bug 6056] New: SATA problem on sata_nv (NFPIK8AA-8EKRS) Date: Sat, 11 Feb 2006 13:08:58 -0800 Message-ID: <20060211130858.5a54aa55.akpm@osdl.org> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from smtp.osdl.org ([65.172.181.4]:50829 "EHLO smtp.osdl.org") by vger.kernel.org with ESMTP id S932354AbWBKVJk (ORCPT ); Sat, 11 Feb 2006 16:09:40 -0500 Received: from shell0.pdx.osdl.net (fw.osdl.org [65.172.181.6]) by smtp.osdl.org (8.12.8/8.12.8) with ESMTP id k1BL9cDZ018908 (version=TLSv1/SSLv3 cipher=EDH-RSA-DES-CBC3-SHA bits=168 verify=NO) for ; Sat, 11 Feb 2006 13:09:38 -0800 Received: from bix (shell0.pdx.osdl.net [10.9.0.31]) by shell0.pdx.osdl.net (8.13.1/8.11.6) with SMTP id k1BL9cL3013071 for ; Sat, 11 Feb 2006 13:09:38 -0800 Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org This might be an ACPI problem? Begin forwarded message: Date: Sat, 11 Feb 2006 08:00:00 -0800 From: bugme-daemon@bugzilla.kernel.org To: bugme-new@lists.osdl.org Subject: [Bugme-new] [Bug 6056] New: SATA problem on sata_nv (NFPIK8AA-8EKRS) http://bugzilla.kernel.org/show_bug.cgi?id=6056 Summary: SATA problem on sata_nv (NFPIK8AA-8EKRS) Kernel Version: 2.6.15.4 Status: NEW Severity: high Owner: jgarzik@pobox.com Submitter: tawa777@ybb.ne.jp Most recent kernel where this bug did not occur: Distribution: FedoraCore4(x86-64) Hardware Environment: CPU: Opteron 140EE Motherboard: NFPIK8AA-8EKRS Memory: 512MB x 2 (ECC-Reg. DDR400) HDD:HDS728080PLA380. Software Environment: Problem Description: I have begun to use a PC with a Motherboard named NFPIK8AA-8EKRS. http://www.foxconnchannel.com/products_motherboard_2.cfm?pName=NFPIK8AA-8EKRS The Board has two on-board SATA controllers, one is called Nforce4 Professional 2200(CK8-04) other is called Nforce4 professional 2050(I/O-4). And each controller has four SATA ports. Thus this board has total 8 SATA ports. I find when a SATA Disk which FC4 is installed is connected to a SATA ports controlled by I/O-4, the disk is not boot without the option of "acpi=noirq". When the Disk is connected to CK8-04, Boot process works fine. I have took pictures of monitor showing error message in booting without "acpi=noirq". http://type-r.dnsalias.net/9usjs/a.jpg http://type-r.dnsalias.net/9usjs/b.jpg http://type-r.dnsalias.net/9usjs/c.jpg http://type-r.dnsalias.net/9usjs/d.jpg http://type-r.dnsalias.net/9usjs/e.jpg I also put dmesg's http://type-r.dnsalias.net/9usjs/dmesg.txt http://type-r.dnsalias.net/9usjs/dmesg_noirq.txt. Former shows the log when I connect the HDD to the port controlled by CK8-04, latter shows one when I connect the HDD to the port controlled by I/O-4. If further information is needed, I will post it as much as possible. Steps to reproduce: 1. Power off the PC 2. Connect the SATA disk to ports controlled by I/O-4. 3. Power on the PC ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is.