From: Fredrik Roubert Subject: Re: Error using DC315U to drive ScanJet 4c Date: Thu, 16 Feb 2006 12:30:27 +0100 Message-ID: <20060216113027.GA3412@igloo.df.lth.se> References: <20060211011457.GA1839@igloo.df.lth.se> <20060213171052.GI18853@igloo.df.lth.se> <20060214010138.GJ18853@igloo.df.lth.se> <20060215214349.GA7947@igloo.df.lth.se> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from igloo.df.lth.se ([194.47.250.47]:46250 "EHLO df.lth.se") by vger.kernel.org with ESMTP id S1751356AbWBPLaf (ORCPT ); Thu, 16 Feb 2006 06:30:35 -0500 Content-Disposition: inline In-Reply-To: Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Guennadi Liakhovetski Cc: linux-scsi@vger.kernel.org On Wed 15 Feb 23:33 CET 2006, Guennadi Liakhovetski wrote: > Ok, I will assume that this dump includes the KERN_DEBUG messages too= now. So would I, or else the "reselect: w/o disconnected cmds" wouldn't be there. > Still, could you, please, just verify that you don't have anything el= se > from dc395x in your /var/log/kern.log (if you have one)? There is nothing else there, or in /var/log/debug. > Could you, please, remove / comment out these 2 lines and try again? OK, this is the log from loading the new module until the second failed scan: [49712.862170] dc395x: Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 = v2.05, 2004/03/08 [49712.862190] ACPI: PCI Interrupt 0000:04:05.0[A] -> GSI 20 (level, lo= w) -> IRQ 19 [49713.104766] dc395x: Used settings: AdapterID=3D07, Speed=3D0(20.0MHz= ), dev_mode=3D0x57 [49713.104772] dc395x: AdaptMode=3D0x0f, Tags=3D4(16), D= elayReset=3D1s [49713.104778] dc395x: Connectors: Termination: Auto Low High [49713.080481] dc395x: Performing initial SCSI bus reset [49713.081006] scsi3 : Tekram DC395(U/UW/F), DC315(U) - ASIC TRM-S1040 = v2.05, 2004/03/08 [49714.608526] Vendor: HP Model: C2520A Rev: 3503 [49714.608566] Type: Processor ANSI SCSI r= evision: 02 [49714.608654] 3:0:2:0: Attached scsi generic sg2 type 3 [49787.196864] dc395x: reselect: w/o disconnected cmds <02-0> [49787.196886] dc395x: disconnect: Unexpected reselection <02-0> [49906.975135] dc395x: eh_abort: (pid#899) target=3D<02-0> cmd=3Dffff81= 006cbd6d40 [49906.975148] dc395x: eh_abort: Command in progress<6>dc395x: eh_bus_r= eset: (pid#899) target=3D<02-0> cmd=3Dffff81006cbd6d40 [49906.975675] dc395x: doing_srb_done: pids G:899(02-0) [50083.137467] dc395x: reselect: w/o disconnected cmds <02-0> [50083.137487] dc395x: disconnect: Unexpected reselection <02-0> [50202.914281] dc395x: eh_abort: (pid#3210) target=3D<02-0> cmd=3Dffff8= 1006cbd6640 [50202.914288] dc395x: eh_abort: Command in progress<6>dc395x: eh_bus_r= eset: (pid#3210) target=3D<02-0> cmd=3Dffff81006cbd6640 [50202.914816] dc395x: doing_srb_done: pids G:3210(02-0) Cheers // Fredrik Roubert --=20 S=F6rbyplan 5 | +46 8 7609169 / +46 708 776974 SE-163 71 Sp=E5nga | http://www.df.lth.se/~roubert/ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html