From: Fredrik Roubert Subject: Re: Error using DC315U to drive ScanJet 4c Date: Thu, 23 Feb 2006 16:37:45 +0100 Message-ID: <20060223153745.GB8644@igloo.df.lth.se> References: <20060214010138.GJ18853@igloo.df.lth.se> <20060215214349.GA7947@igloo.df.lth.se> <20060216113027.GA3412@igloo.df.lth.se> <20060218224121.GA21399@igloo.df.lth.se> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from igloo.df.lth.se ([194.47.250.47]:7614 "EHLO df.lth.se") by vger.kernel.org with ESMTP id S1751406AbWBWPh6 (ORCPT ); Thu, 23 Feb 2006 10:37:58 -0500 Content-Disposition: inline In-Reply-To: Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: Guennadi Liakhovetski Cc: linux-scsi@vger.kernel.org On Sun 19 Feb 21:54 CET 2006, Guennadi Liakhovetski wrote: > 2) your problem might be in hardware rather than in software. For the > latter I have to ask you if your cables are ok? Termination? Maybe > replace the cable? Do you have any other SCSI card where you also cou= ld > test your scanner? The scanner works OK when connected to my old AHA1542 controller in my old computer. The two SCSI controllers have different connectors, so th= e cable I'm using now is also new, and untested. It could, no doubt, be a problem with either the cable or the SCSI controller hardware. > After you confirm that your cables and termination are fine, It's fine, as far as I know. It's a brand new cable and I just plugged it in replacing the old cable. Do you have any suggestions as to how I could test cable and termination? > I would ask you to do a few more tests to look more exactly at what's > happening, and to verify at least the non-sg path of my patch. So, wo= uld > you agree to help me further with the tests or would you rather or wo= uld > you prefer to stop now? Of course I'd like to help out. (How else would Linux continue to improve?) Just tell me what you want me to do. Cheers // Fredrik Roubert --=20 S=F6rbyplan 5 | +46 8 7609169 / +46 708 776974 SE-163 71 Sp=E5nga | http://www.df.lth.se/~roubert/ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html