From: Thomas Renninger Subject: Suppress acpi_pci_irq_derive "Unable to derive IRQ" msg Date: Tue, 7 Mar 2006 07:49:50 +0100 Message-ID: <200603070749.51249.trenn@suse.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Received: from cantor2.suse.de ([195.135.220.15]:17853 "EHLO mx2.suse.de") by vger.kernel.org with ESMTP id S1752014AbWCGGtx (ORCPT ); Tue, 7 Mar 2006 01:49:53 -0500 Content-Disposition: inline Sender: linux-acpi-owner@vger.kernel.org List-Id: linux-acpi@vger.kernel.org To: linux-acpi@vger.kernel.org Cc: edwardsg@sgi.com, "Brown, Len" This message: ACPI Warning (pci_irq-0383): Unable to derive IRQ for device 0001:00:04.0 [20060127] seem to appear on a couple of machines which don't provide IRQ info via ACPI. There should appear a message like: printk(KERN_WARNING PREFIX "PCI Interrupt %s[%c]: no GSI", pci_name(dev), ('A' + pin)); in this case anyway, therefore just reverting this message to Debug/Info message should be OK... Subject: Suppress acpi_irq_derive failed message. Suppress acpi_irq_derive failed message as a warning is printed out in a higher function anyway if no irq could be derived Signed-off-by: Thomas Renninger drivers/acpi/pci_irq.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) Index: linux-2.6.15/drivers/acpi/pci_irq.c =================================================================== --- linux-2.6.15.orig/drivers/acpi/pci_irq.c +++ linux-2.6.15/drivers/acpi/pci_irq.c @@ -379,8 +379,8 @@ acpi_pci_irq_derive(struct pci_dev *dev, } if (irq < 0) { - ACPI_WARNING((AE_INFO, "Unable to derive IRQ for device %s", - pci_name(dev))); + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Unable to derive IRQ for device %s", + pci_name(dev))); return_VALUE(-1); }