From: Roger Larsson Date: Wed, 8 Mar 2006 08:24:03 +0100 Subject: [U-Boot-Users] AT91RM9100 board with uCOS-II. What boot loader to use? In-Reply-To: <3293578.post@talk.nabble.com> References: <3259661.post@talk.nabble.com> <3293578.post@talk.nabble.com> Message-ID: <200603080824.04766.roger.larsson@norran.net> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de On onsdag 08 mars 2006 03.13, shuwn yuan wrote: > Uboot> setenv bootcmd cp 10020000 20008000 f818;go 20008000 > > But this seems not work. I can't set it successfully. It directly jump to > RAM location 0x20008000 after this & I can't save the "bootcmd". Your command is seen as two commands: > setenv bootcmd cp 10020000 20008000 f818 followed by > go 20008000 You need to escape the semicolon ';' see http://www.denx.de/wiki/view/DULG/UBootCmdGroupEnvironment#Section_5.9.6.3. /RogerL