From: Jeff Stevens Date: Sun, 12 Mar 2006 17:48:29 -0800 (PST) Subject: [U-Boot-Users] AMCC Luan BDI2000 Config File In-Reply-To: <4402535D.9080601@softadvances.com> Message-ID: <20060313014829.62471.qmail@web33408.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Thanks for the files John! What DDR2 memory configuration is this for (DIMM size, manufacturer, part number, etc)? I have the Luan board booting until it relocates into ram, but it never reaches board_init_r. I'm wondering if we have different modules. Also, does anyone know if U-Boot is going to eventually support SPD for DDR2? Thanks, Jeff Stevens --- John Otken wrote: > > Does anyone know where I can get a BDI2000 config > file > > for AMCC's Luan eval board, and a BDI2000 reg > file for > > the 440SP? > > > 06/07/2005 01:03 PM 6,332 evb440sp.cfg > 05/30/2005 03:39 PM 11,612 reg440sp.def > > > Here evb440sp.cfg (page down for reg440sp.def): > > > ;bdiGDB configuration file for AMCC 440SP LUAN 2 > Board > ; > ---------------------------------------------------- > ; > [INIT] > ; Setup TLB > WTLB 0xF0000095 0x1F00003F ;Boot Space 256MB > (Flash,SRAM,EPLD) > WTLB 0x00000094 0x0000003F ;SDRAM 256MB @ > 0x00000000 > WTLB 0x10000094 0x0100003F ;SDRAM 256MB @ > 0x10000000 > ; > ; Setup caches > WSPR 0x370 0x00000000 ;INV0 > WSPR 0x371 0x00000000 ;INV1 > WSPR 0x372 0x00000000 ;INV2 > WSPR 0x373 0x00000000 ;INV3 > WSPR 0x374 0x00000000 ;ITV0 > WSPR 0x375 0x00000000 ;ITV1 > WSPR 0x376 0x00000000 ;ITV2 > WSPR 0x377 0x00000000 ;ITV3 > WSPR 0x390 0x00000000 ;DNV0 > WSPR 0x391 0x00000000 ;DNV1 > WSPR 0x392 0x00000000 ;DNV2 > WSPR 0x393 0x00000000 ;DNV3 > WSPR 0x394 0x00000000 ;DTV0 > WSPR 0x395 0x00000000 ;DTV1 > WSPR 0x396 0x00000000 ;DTV2 > WSPR 0x397 0x00000000 ;DTV3 > WSPR 0x398 0x0001f800 ;DVLIM > WSPR 0x399 0x0001f800 ;IVLIM > ; > ; Setup Peripheral Bus > WDCR 0x12 0x00000010 ;Select EBC0_B0AP > WDCR 0x13 0x03800000 ;B0AP: Flash and SRAM > WDCR 0x12 0x00000000 ;Select EBC0_B0CR > WDCR 0x13 0xFFE38000 ;B0CR: 2MB at 0xFFE00000, r/w, > 8bit > ; > WDCR 0x12 0x00000011 ;Select EBC0_B1AP > WDCR 0x13 0x02095a40 ;B1AP: EPLD and FRAM > WDCR 0x12 0x00000001 ;Select EBC0_B1CR > WDCR 0x13 0xf8018000 ;B1CR: 1MB at 0xF8000000, r/w, > 8bit > ; > WDCR 0x12 0x00000012 ;Select EBC0_B2AP > WDCR 0x13 0x03800000 ;B2AP: 4 MB Flash > WDCR 0x12 0x00000002 ;Select EBC0_B2CR > WDCR 0x13 0xff858000 ;B2CR: 4MB at 0xFF800000, r/w, > 8bit > ; > ; Setup DDR2 Controller > WDCR 0x10 0x00000021 ;Select MCIF0_MCOPT2 > WDCR 0x11 0x84000000 ;MCOPT2: Clear DCEN BIT > WDCR 0x10 0x00000020 ;Select MCIF0_MCOPT1 > WDCR 0x11 0x2D122000 ;MCOPT1: ECC OFF,64 bits,4 > banks,DDR2 > WDCR 0x10 0x00000026 ;Select MCIF0_CODT > WDCR 0x11 0x00800026 ;CODT: Die Termination On > WDCR 0x10 0x00000081 ;Select MCIF0_WRDTR > WDCR 0x11 0x82000800 ;WRDTR: Write DQS Adv 90 + > Fractional DQS Delay > WDCR 0x10 0x00000080 ;Select MCIF0_CLKTR > WDCR 0x11 0x80000000 ;CLKTR: Adv Addr clock by 180 > deg > WDCR 0x10 0x00000040 ;Select MCIF0_MB0CF > WDCR 0x11 0x00000201 ;MB0CF: Turn on CS0, N x 10 > coll > WDCR 0x10 0x00000044 ;Select MCIF0_MB1CF > WDCR 0x11 0x00000201 ;MB1CF: Turn on CS0, N x 10 > coll > WDCR 0x10 0x00000030 ;Select MCIF0_RTR > WDCR 0x11 0x08200000 ;RTR: Refresh every 7.8125uS > WDCR 0x10 0x00000085 ;Select MCIF0_SDTR1 > WDCR 0x11 0x80201000 ;SDTR1: Timing Register 1 > WDCR 0x10 0x00000086 ;Select MCIF0_SDTR2 > WDCR 0x11 0x42103242 ;SDTR2: Timing Register 2 > WDCR 0x10 0x00000087 ;Select MCIF0_SDTR3 > WDCR 0x11 0x0C100D14 ;SDTR3: Timing Register 3 > WDCR 0x10 0x00000088 ;Select MCIF0_MMODE > WDCR 0x11 0x00000642 ;MMODE: CAS = 4 cycles > WDCR 0x10 0x00000089 ;Select MCIF0_MEMODE > WDCR 0x11 0x00000400 ;MEMODE: Diff DQS disabled, ODT > term disabled > ; > WDCR 0x10 0x00000050 ;Select MCIF0_INITPLR0 > WDCR 0x11 0x81b80000 ;INITPLR0: NOP > WDCR 0x10 0x00000051 ;Select MCIF0_INITPLR1 > WDCR 0x11 0x82100400 ;INITPLR1: PRE > WDCR 0x10 0x00000052 ;Select MCIF0_INITPLR2 > WDCR 0x11 0x80820000 ;INITPLR2: EMR2 > WDCR 0x10 0x00000053 ;Select MCIF0_INITPLR3 > WDCR 0x11 0x80830000 ;INITPLR3: EMR3 > WDCR 0x10 0x00000054 ;Select MCIF0_INITPLR4 > WDCR 0x11 0x80810000 ;INITPLR4: EMR DLL ENABLE > WDCR 0x10 0x00000055 ;Select MCIF0_INITPLR5 > WDCR 0x11 0x80800542 ;INITPLR5: MR DLL RESET > WDCR 0x10 0x00000056 ;Select MCIF0_INITPLR6 > WDCR 0x11 0x82100400 ;INITPLR6: PRE > WDCR 0x10 0x00000057 ;Select MCIF0_INITPLR7 > WDCR 0x11 0x99080000 ;INITPLR7: Refresh > WDCR 0x10 0x00000058 ;Select MCIF0_INITPLR8 > WDCR 0x11 0x99080000 ;INITPLR8: Refresh > WDCR 0x10 0x00000059 ;Select MCIF0_INITPLR9 > WDCR 0x11 0x99080000 ;INITPLR9: Refresh > WDCR 0x10 0x0000005A ;Select MCIF0_INITPLR10 > WDCR 0x11 0x99080000 ;INITPLR10: Refresh > WDCR 0x10 0x0000005B ;Select MCIF0_INITPLR11 > WDCR 0x11 0x80800442 ;INITPLR11: MR > WDCR 0x10 0x0000005C ;Select MCIF0_INITPLR12 > WDCR 0x11 0x80810380 ;INITPLR12: EMR OCD Default > WDCR 0x10 0x0000005D ;Select MCIF0_INITPLR13 > WDCR 0x11 0x80810000 ;INITPLR12: EMR OCD Exit > DELAY 10 > ; > WDCR 0x10 0x00000021 ;Select MCIF0_MCOPT2 > WDCR 0x11 0x28000000 ;MCOPT2: Execute Preloaded > Initialization Sequence, set DC_EN > DELAY 100 > ; > WDCR 0x40 0x0000F800 ;MQ0_B0BAS: Base Address > 0x00000000 / Size 256 MB > WDCR 0x41 0x1000F800 ;MQ0_B1BAS: Base Address > 0x10000000 / Size 256 MB > ; > WDCR 0x10 0x00000078 ;Select MCIF0_RDCC > WDCR 0x11 0x00000000 ;RDCC: Auto Set Read Stage > WDCR 0x10 0x00000070 ;Select MCIF0_RQDC > WDCR 0x11 0x8000003A ;RQDC: Read DQS Delay Control > Enabled + Fractional DQS Delay > WDCR 0x10 0x00000074 ;Select MCIF0_RFDC > WDCR 0x11 0x00000200 ;RFDC: 2 clock feedback delay > ; > > > [TARGET] > JTAGCLOCK 0 ;use 16 MHz JTAG > clock > CPUTYPE 440 ;the used target CPU type > SCANMISC 8 ;IR length is 8 bits > for 440SP > WAKEUP 50 ;wakeup time after > reset > BREAKMODE SOFT ;SOFT or HARD, HARD > uses PPC hardware breakpoint > STEPMODE HWBP ;JTAG or HWBP, HWBP > uses one or two hardware breakpoints > > > [HOST] > IP 151.120.25.119 > FILE E:\cygwin\home\demo\mpc860\fibo.elf > FORMAT ELF > DUMP E:\temp\dump.bin > PROMPT 440SP> > > > [FLASH] > ; program large 4MB Flash (AM29LV033C) at 0xff800000 > WORKSPACE 0xFFE00000 ;workspace in SRAM for fast > programming algorithm > CHIPTYPE AM29F ;Flash type > CHIPSIZE 0x400000 ;The size of one flash chip > in bytes > BUSWIDTH 8 ;The width of the flash > memory bus in bits (8 | 16 | 32) > FILE E:\temp\dump256k.bin > FORMAT BIN 0xFF800000 > ERASE 0xFF800000 ;erase sector 0 of flash > (AM29LV033C) > ERASE 0xFF810000 ;erase sector 1 of flash > ERASE 0xFF820000 ;erase sector 2 of flash > ERASE 0xFF830000 ;erase sector 3 of flash > ERASE 0xFF840000 ;erase sector 4 of flash > ERASE 0xFF850000 ;erase sector 5 of flash > ERASE 0xFF860000 ;erase sector 6 of flash > ERASE 0xFF870000 ;erase sector 7 of flash > > > [REGS] > IDCR1 0x00C 0x00D ;CPR0_CFGADDR and CPR0_CFGDATA > IDCR2 0x00E 0x00F ;SDR0_CFGADDR and SDR0_CFGDATA > IDCR3 0x010 0x011 ;MCIF0_CFGADDR and MCIF0_CFGDATA > IDCR4 0x012 0x013 ;EBC0_CFGADDR and EBC0_CFGDATA > FILE $reg440sp.def > > > > And here's reg440sp.def: > > ;Register definition for PPC440SP > ;================================ > ; > ; name: user defined name of the register > ; type: the type of the register > ; GPR general purpose register > ; SPR special purpose register > ; MM memory mapped register > ; DMMx direct memory mapped register with offset > ; x = 1..4 > ; the base is defined in the configuration file > ; e.g. DMM1 0x02200000 > ; IDCRx indirect accessed DCR's > ; x = 1..4 > ; the addr and data DCR is defined in the > configuration file > ; e.g. IDCR1 0x010 0x011 > ; addr: the number, adddress or offset of the > register > ; size the size of the register (8,16 or 32) > ; > ;name type addr size > ;------------------------------------------- > ; > sp GPR 1 > ; > ; Special Purpose Registers > ; > xer SPR 0x001 > lr SPR 0x008 > ctr SPR 0x009 > dec SPR 0x016 > srr0 SPR 0x01a > srr1 SPR 0x01b > pid SPR 0x030 > decar SPR 0x036 > csrr0 SPR 0x03a > csrr1 SPR 0x03b > dear SPR 0x03d > esr SPR 0x03e > ivpr SPR 0x03f > usprg0 SPR 0x100 > sprg4r SPR 0x104 > sprg5r SPR 0x105 > sprg6r SPR 0x106 > sprg7r SPR 0x107 > tblr SPR 0x10c > tbur SPR 0x10d > sprg0 SPR 0x110 > sprg1 SPR 0x111 > sprg2 SPR 0x112 > sprg3 SPR 0x113 > sprg4w SPR 0x114 > sprg5w SPR 0x115 > sprg6w SPR 0x116 > sprg7w SPR 0x117 > tblw SPR 0x11c > tbuw SPR 0x11d > pir SPR 0x11e > pvr SPR 0x11f > dbsr SPR 0x130 > dbcr0 SPR 0x134 > dbcr1 SPR 0x135 > dbcr2 SPR 0x136 > iac1 SPR 0x138 > iac2 SPR 0x139 > iac3 SPR 0x13a > iac4 SPR 0x13b > dac1 SPR 0x13c > dac2 SPR 0x13d > dvc1 SPR 0x13e > dvc2 SPR 0x13f > tsr SPR 0x150 > tcr SPR 0x154 > ivor0 SPR 0x190 > ivor1 SPR 0x191 > ivor2 SPR 0x192 > ivor3 SPR 0x193 > ivor4 SPR 0x194 > ivor5 SPR 0x195 > ivor6 SPR 0x196 > ivor7 SPR 0x197 > ivor8 SPR 0x198 > ivor9 SPR 0x199 > ivor10 SPR 0x19a > ivor11 SPR 0x19b > ivor12 SPR 0x19c > ivor13 SPR 0x19d > ivor14 SPR 0x19e > ivor15 SPR 0x19f > mcsrr0 SPR 0x23a > mcsrr1 SPR 0x23b > mcsr SPR 0x23c > inv0 SPR 0x370 > inv1 SPR 0x371 > inv2 SPR 0x372 > inv3 SPR 0x373 > itv0 SPR 0x374 > itv1 SPR 0x375 > itv2 SPR 0x376 > itv3 SPR 0x377 > ccr1 SPR 0x378 > dnv0 SPR 0x390 > dnv1 SPR 0x391 > dnv2 SPR 0x392 > dnv3 SPR 0x393 > dtv0 SPR 0x394 > dtv1 SPR 0x395 > dtv2 SPR 0x396 > dtv3 SPR 0x397 > dvlim SPR 0x398 > ivlim SPR 0x399 > rstcfg SPR 0x39b > dcdbtrl SPR 0x39c > dcdbtrh SPR 0x39d > icdbtrl SPR 0x39e > icdbtrh SPR 0x39f > mmucr SPR 0x3b2 > ccr0 SPR 0x3b3 > icdbdr SPR 0x3d3 > dbdr SPR 0x3f3 > ; > ; Directly Accessed DCR's > ; > cpr0_cfgaddr DCR 0x00C ;Clocking > Configuration Address Register > cpr0_cfgdata DCR 0x00D ;Clocking > Configuration Data Register > sdr0_cfgaddr DCR 0x00E ;System DCR > Configuration Address Register > sdr0_cfgdata DCR 0x00F ;System DCR > Configuration Data Register > mcif0_cfgaddr DCR 0x010 ;Memory Controller > Configuration Address > mcif0_cfgdata DCR 0x011 ;Memory Controller > Configuration Data > ebc0_cfgaddr DCR 0x012 ;EBC0 Configuration > Address > ebc0_cfgdata DCR 0x013 ;EBC0 Configuration > Data > ; > ; Internal SRAM Controller > ; > sram0_sb0cr DCR 0x020 > sram0_sb1cr DCR 0x021 > sram0_sb2cr DCR 0x022 > sram0_sb3cr DCR 0x023 > sram0_bear DCR 0x024 > sram0_besr0 DCR 0x025 > sram0_besr1 DCR 0x026 > sram0_pmeg DCR 0x027 > sram0_cid DCR 0x028 > sram0_revid DCR 0x029 > sram0_dpc DCR 0x0a0 > ; > ; Level 2 cache > ; > l2c0_cfg DCR 0x030 > l2c0_cmd DCR 0x031 > l2c0_addr DCR 0x032 > l2c0_data DCR 0x033 > l2c0_sr DCR 0x034 > l2c0_revid DCR 0x035 > l2c0_snp0 DCR 0x036 > l2c0_snp1 DCR 0x037 > ; > ; Memory Queue > ; > mq0_b0bas DCR 0x0040 > mq0_b1bas DCR 0x0041 > mq0_bauh DCR 0x0043 > mq0_cf1h DCR 0x0045 > mq0_esh DCR 0x0047 > mq0_eauh DCR 0x0048 > mq0_ealh DCR 0x0049 > mq0_baul DCR 0x004A > mq0_cf1l DCR 0x004B > mq0_esl DCR 0x004C > mq0_eaul DCR 0x004D > mq0_eall DCR 0x004E > mq0_cfbhl DCR 0x004F > ; > ; I2O/DMA > ; > i2o0_llirq0l DCR 0x0060 > i2o0_llirq0h DCR 0x0061 > i2o0_llwr0m DCR 0x0062 > i2o0_llirq1l DCR 0x0063 > i2o0_llirq1h DCR 0x0064 > i2o0_llwr1m DCR 0x0065 > i2o0_ibal DCR 0x0066 > i2o0_ibah DCR 0x0067 > i2o0_dma0_st DCR 0x0068 > i2o0_dma1_st DCR 0x0069 > i2o0_istat DCR 0x006A > i2o0_dma0_op DCR 0x006B > i2o0_dma1_op DCR 0x006C > i2o0_seat DCR 0x006D > i2o0_sead DCR 0x006E > i2o0_i2o_op DCR 0x006F > i2o0_hwr0l DCR 0x0070 > i2o0_hwr0h DCR 0x0071 > i2o0_hwrom DCR 0x0072 > i2o0_hwr1l DCR 0x0073 > i2o0_hwr1h DCR 0x0074 > i2o0_hwr1m DCR 0x0075 > i2o0_miscc DCR 0x0076 > ; > ; PLB Crossbar Arbiter Registers > ; > plb_revid DCR 0x0080 > plb0_acr DCR 0x0081 > plb0_besrl DCR 0x0082 > plb0_besrh DCR 0x0083 > plb0_bearl DCR 0x0084 > plb0_bearh DCR 0x0085 > plb_ccr DCR 0x0088 > plb1_acr DCR 0x0089 > plb1_besrl DCR 0x008A > plb1_besrh DCR 0x008B > plb1_bearl DCR 0x008C > plb1_bearh DCR 0x008D > ; > ; PLB to OPB bridge Registers > ; > pob0_besr0 DCR 0x0090 > pob0_bearl DCR 0x0092 > pob0_bearh DCR 0x0093 > pob0_besr1 DCR 0x0094 > pob0_confg DCR 0x0096 > pob0_latency DCR 0x0098 > pob0_revid DCR 0x009A > ; > ; Universal Interrupt Controllers > ; > uic0_sr DCR 0x0c0 > uic0_er DCR 0x0c2 > uic0_cr DCR 0x0c3 > uic0_pr DCR 0x0c4 > uic0_tr DCR 0x0c5 > uic0_msr DCR 0x0c6 > uic0_vr DCR 0x0c7 > uic0_vcr DCR 0x0c8 > uic1_sr DCR 0x0d0 > uic1_er DCR 0x0d2 > uic1_cr DCR 0x0d3 > uic1_pr DCR 0x0d4 > uic1_tr DCR 0x0d5 > uic1_msr DCR 0x0d6 > uic1_vr DCR 0x0d7 > uic1_vcr DCR 0x0d8 > ; > ; Clocking and Power Management > ; > cpm0_er DCR 0x0e0 > cpm0_fr DCR 0x0e1 > cpm0_sr DCR 0x0e2 > ; > ; Memory Access Layer > ; > mal0_cfg DCR 0x0180 > mal0_esr DCR 0x0181 > mal0_ier DCR 0x0182 > mal0_txcasr DCR 0x0184 > mal0_txcarr DCR 0x0185 > mal0_txeobisr DCR 0x0186 > mal0_txdeir DCR 0x0187 > mal0_txtattrr DCR 0x0188 > mal0_txbaddr DCR 0x0189 > mal0_rxcasr DCR 0x0190 > mal0_rxcarr DCR 0x0191 > mal0_rxeobisr DCR 0x0192 > mal0_rxdeir DCR 0x0193 > mal0_rxtattrr DCR 0x0194 > mal0_rxbaddr DCR 0x0195 > mal0_txctp0r DCR 0x01A0 > mal0_rxctp0r DCR 0x01C0 > mal0_rcbs0 DCR 0x01E0 > ; > ; > ; Indirectly Accessed DCR's > ; > ; IDCR1 must be set to CPR0_CFGADDR and > CPR0_CFGDATA > ; IDCR2 must be set to SDR0_CFGADDR and > SDR0_CFGDATA > ; IDCR3 must be set to MCIF0_CFGADDR and > MCIF0_CFGDATA > ; IDCR4 must be set to EBC0_CFGADDR and > EBC0_CFGDATA > ; > ; > ; Clocking and PowerOn Reset DCR > ; > cpr0_clkupd IDCR1 0x0020 > cpr0_pllc IDCR1 0x0040 > cpr0_plld IDCR1 0x0060 > cpr0_primad IDCR1 0x0080 > cpr0_primbd IDCR1 0x00A0 > cpr0_opbd IDCR1 0x00C0 > cpr0_perd IDCR1 0x00E0 > cpr0_mald IDCR1 0x0100 > cpr0_icfg IDCR1 0x0140 > ; > ; > ; System DCR > ; > sdr0_sdstp0 IDCR2 0x0020 > sdr0_sdstp1 IDCR2 0x0021 > sdr0_sdstp2 IDCR2 0x0022 > sdr0_sdstp3 IDCR2 0x0023 > sdr0_pinstp IDCR2 0x0040 > sdr0_sdcs IDCR2 0x0060 > sdr0_ecid0 IDCR2 0x0080 > sdr0_ecid1 IDCR2 0x0081 > sdr0_ecid2 IDCR2 0x0082 > sdr0_jtag IDCR2 0x00C0 > sdr0_ddrdl IDCR2 0x00E1 > sdr0_uart0 IDCR2 0x0120 > sdr0_uart1 IDCR2 0x0121 > sdr0_uart2 IDCR2 0x0122 > sdr0_cp440 IDCR2 0x0180 > sdr0_xcr0 IDCR2 0x01C0 > sdr0_xpllc0 IDCR2 0x01C1 > sdr0_xplld0 IDCR2 0x01C2 > sdr0_xcr1 IDCR2 0x01C3 > sdr0_xpllc1 IDCR2 0x01C4 > sdr0_xplld1 IDCR2 0x01C5 > sdr0_xcr2 IDCR2 0x01C6 > sdr0_xpllc2 IDCR2 0x01C7 > sdr0_xplld2 IDCR2 0x01C8 > sdr0_srst IDCR2 0x0200 > sdr0_slpipe IDCR2 0x0220 > sdr0_amp0 IDCR2 0x0240 > sdr0_amp1 IDCR2 0x0241 > sdr0_mirq0 IDCR2 0x0260 > sdr0_mirq1 IDCR2 0x0261 > sdr0_maltbl IDCR2 0x0280 > sdr0_malrbl IDCR2 0x02A0 > sdr0_maltbs IDCR2 0x02C0 > sdr0_malrbs IDCR2 0x02E0 > sdr0_cust0 IDCR2 0x4000 > sdr0_sdstp4 IDCR2 0x4001 > sdr0_cust1 IDCR2 0x4002 > sdr0_sdstp5 IDCR2 0x4003 > sdr0_cust2 IDCR2 0x4004 > sdr0_sdstp6 IDCR2 0x4005 > sdr0_cust3 IDCR2 0x4006 > sdr0_sdstp7 IDCR2 0x4007 > sdr0_pfc0 IDCR2 0x4100 > sdr0_pfc1 IDCR2 0x4101 > sdr0_plbtr IDCR2 0x4200 > sdr0_mfr IDCR2 0x4300 > ; > ; > ; DDR-SDRAM Controller DCRs > ; > mcif0_mcstat IDCR3 0x0014 > mcif0_mcopt1 IDCR3 0x0020 > mcif0_mcopt2 IDCR3 0x0021 > mcif0_modt0 IDCR3 0x0022 > mcif0_modt1 IDCR3 0x0023 > mcif0_codt IDCR3 0x0026 > mcif0_vvpr IDCR3 0x0027 > ;mcif0_opar1 IDCR3 0x0028 > ;mcif0_opar2 IDCR3 0x0029 > mcif0_rtr IDCR3 0x0030 > mcif0_pmit IDCR3 0x0034 > mcif0_mb0cf IDCR3 0x0040 > mcif0_mb1cf IDCR3 0x0044 > mcif0_initplr0 IDCR3 0x0050 > mcif0_initplr1 IDCR3 0x0051 > mcif0_initplr2 IDCR3 0x0052 > mcif0_initplr3 IDCR3 0x0053 > mcif0_initplr4 IDCR3 0x0054 > mcif0_initplr5 IDCR3 0x0055 > mcif0_initplr6 IDCR3 0x0056 > mcif0_initplr7 IDCR3 0x0057 > mcif0_initplr8 IDCR3 0x0058 > mcif0_initplr9 IDCR3 0x0059 > mcif0_initplr10 IDCR3 0x005A > mcif0_initplr11 IDCR3 0x005B > mcif0_initplr12 IDCR3 0x005C > mcif0_initplr13 IDCR3 0x005D > mcif0_initplr14 IDCR3 0x005E > mcif0_initplr15 IDCR3 0x005F > mcif0_rqdc IDCR3 0x0070 > mcif0_rfdc IDCR3 0x0074 > mcif0_rdcc IDCR3 0x0078 > mcif0_dlcr IDCR3 0x007A > mcif0_clktr IDCR3 0x0080 > mcif0_wrdtr IDCR3 0x0081 > mcif0_sdtr1 IDCR3 0x0085 > mcif0_sdtr2 IDCR3 0x0086 > mcif0_sdtr3 IDCR3 0x0087 > mcif0_mmode IDCR3 0x0088 > mcif0_memode IDCR3 0x0089 > mcif0_ecces IDCR3 0x0098 > ; > ; > ; External Bus Controller DCRs > ; > ebc0_b0cr IDCR4 0x00 > ebc0_b1cr IDCR4 0x01 > ebc0_b2cr IDCR4 0x02 > ebc0_b0ap IDCR4 0x10 > ebc0_b1ap IDCR4 0x11 > ebc0_b2ap IDCR4 0x12 > ebc0_bear IDCR4 0x20 > ebc0_besr IDCR4 0x21 > ebc0_cfg IDCR4 0x23 > ebc0_cid IDCR4 0x24 > ; > > > > Jeff Stevens wrote: > > Does anyone know where I can get a BDI2000 config > file > > for AMCC's Luan eval board, and a BDI2000 reg file > for > > the 440SP? > > > > Thanks, > > Jeff > > jsteve17 at yahoo.com > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam > protection around > > http://mail.yahoo.com > > > > > > > ------------------------------------------------------- > > This SF.Net email is sponsored by xPML, a > groundbreaking scripting language > > that extends applications into web and mobile > media. Attend the live webcast > > and join the prime developer group breaking into > this new coding territory! > > > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642 > > _______________________________________________ > > U-Boot-Users mailing list > > U-Boot-Users at lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/u-boot-users > > > __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com