From: Kaushik karandikar Date: Wed, 10 May 2006 00:33:22 -0700 (PDT) Subject: [U-Boot-Users] serial interface in U-boot Message-ID: <20060510073322.28015.qmail@web30602.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all, I am successfully able to configure the u-boot for phytec board (for ARM7TDMI). I am getting the u-boot prompt. But the problem is i am not able to trnasfer the image at specified address in RAM( which is say 0x81000000). Even u-boot is finding this address , thts not the issue. I am transferring a sample application code (blink LED) at this location. As i am getting the prompt and other prints through minicom utility , serial interface is working. Is there any configurable option need to set say for ymodem, kermit,xmodem,zmodem in u-boot ? so that i can transfer my application image through minicom. In my board_config.h file i have define : CONFIG_BAUDRATE 9600 but when i execute the 'bdinfo' command from the prompt i am getting baud as 0. Can anyone please let me know about this. Thanks and Regards, Kaushik --------------------------------- Love cheap thrills? Enjoy PC-to-Phone calls to 30+ countries for just 2?/min with Yahoo! Messenger with Voice. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20060510/52e4d956/attachment.htm