From: Bryan O'Donoghue Date: Fri, 26 May 2006 22:05:53 +0100 Subject: [U-Boot-Users] [PATCH 2/14] Update usbdcore_omap1510.h to unbind it from usbtty Message-ID: <20060526220553.bd7f4b8e.bodonoghue@codehermit.ie> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Signed-off-by: Bryan O'Donoghue modified: include/usbdcore_omap1510.h Moved some defines from usbtty.h to here. Added udc_irq and udc_set_nak, udc_unset_nak to facilitate a more genericised usbtty and USB flow control respectively. udc_set_nak and udc_unset_nak should be implemented by someone with access to omap hardware --- include/usbdcore_omap1510.h | 18 ++++++++++++++---- 1 files changed, 14 insertions(+), 4 deletions(-) 2404435a7b07a254034679b57511332ab98383d5 diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h --- a/include/usbdcore_omap1510.h +++ b/include/usbdcore_omap1510.h @@ -161,10 +161,20 @@ #define UDC_VBUS_CTRL (1 << 19) #define UDC_VBUS_MODE (1 << 18) - -void omap1510_udc_irq(void); -void omap1510_udc_noniso_irq(void); - +/* OMAP Endpoint parameters */ +#define EP0_MAX_PACKET_SIZE 64 +#define UDC_OUT_ENDPOINT 2 +#define UDC_OUT_PACKET_SIZE 64 +#define UDC_IN_ENDPOINT 1 +#define UDC_IN_PACKET_SIZE 64 +#define UDC_INT_ENDPOINT 5 +#define UDC_INT_PKTSIZE 16 +#define UDC_BULK_PKTSIZE 16 + +void udc_irq (void); +/* Flow control */ +void udc_set_nak(int epid); +void udc_unset_nak (int epid); /* Higher level functions for abstracting away from specific device */ void udc_endpoint_write(struct usb_endpoint_instance *endpoint);