From: Michael Sprauve Date: Fri, 9 Jun 2006 15:15:56 -0700 (PDT) Subject: [U-Boot-Users] Problems loading ramdisk Message-ID: <20060609221556.35601.qmail@web37110.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi, I have a very simple and somewhat embarassing question regarding u-boot and loading a ramdisk. I am trying to boot my IXP425 board using a kernel and ramdisk that has been flashed on the board. I have tried following the many suggestions that I have found both on the web, and inside the documentation but still have not had any success. I know the kernel and ramdisk image are good, since I used the same images for booting from Redboot. Below is a snippet of my boot sequence, including the error when trying to mount the ramdisk(initrd) Thanks, Mike ****************************************************** bootm 50040000 50180000 ## Booting image at 50040000 ... Image Name: Snapgear Kernel Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1295376 Bytes = 1.2 MB Load Address: 01600000 Entry Point: 01600000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at 50180000 ... Image Name: Snapgear Ramdisk Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2264374 Bytes = 2.2 MB Load Address: 00800000 Entry Point: 00800000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux............................................................. ................................. done, booting the kernel. Linux version 2.6.13.5 (msprauve at Sebring) (gcc version 3.3.2) #34 Tue Jun 6 14:0 3:35 PDT 2006 CPU: XScale-IXP42x Family [690541f1] revision 1 (ARMv5TE) Machine: Intel IXDP425 Development Platform Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT undefined 5 cache CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/ram0 initrd=0x00800000,8M me m=64M at 0x00000000 hdc=noprobe hdd=noprobe . . . RAMDISK: Couldn't find valid RAM disk image starting at 0. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0) __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com