From: Jeff Stevens Date: Thu, 27 Jul 2006 20:06:41 -0700 (PDT) Subject: [U-Boot-Users] 440SP DDR2 Issue Message-ID: <20060728030641.97705.qmail@web33411.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de I have a custom board I am trying to bring up that is a pretty close architecture to the Luan2 board. I have an unregistered 2GB DDR2 module in the DIMM slot, and it works fine using the BDI2000. However, using the same DDR2 configuration in U-Boot doesn't work. It boots up until the point it transfers over to memory. I have enabled the memory test and it fails at the first address. I have verified all of the memory configuration registers, and all seem to be set correctly. I know there is something in the configuration I am missing, but I can't seem to figure it out. Please help. I would greatly appreciate it. Thanks, Jeff Stevens __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com