From: Arkadiusz Miskiewicz Subject: Re: intel srcu42e, megaraid_mbox, 2.6.16.23, x86_64 - megaraid mbox: critical hardware error! Date: Mon, 31 Jul 2006 14:15:12 +0200 Message-ID: <200607311415.12162.arekm@pld-linux.org> References: <200607311107.36681.arekm@pld-linux.org> Mime-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from outgoing3.smtp.agnat.pl ([193.239.44.85]:55180 "EHLO outgoing3.smtp.agnat.pl") by vger.kernel.org with ESMTP id S1750962AbWGaMPS convert rfc822-to-8bit (ORCPT ); Mon, 31 Jul 2006 08:15:18 -0400 Received: from [83.18.80.218] (helo=[192.168.1.157] ident=matrix157) by tekla.agnat.pl with esmtpsa (TLSv1:DHE-RSA-AES256-SHA:256) (Exim 4.62) (envelope-from ) id 1G7Wg1-00014x-Je for linux-scsi@vger.kernel.org; Mon, 31 Jul 2006 14:15:17 +0200 In-Reply-To: <200607311107.36681.arekm@pld-linux.org> Content-Disposition: inline Sender: linux-scsi-owner@vger.kernel.org List-Id: linux-scsi@vger.kernel.org To: linux-scsi@vger.kernel.org On Monday 31 July 2006 11:07, Arkadiusz Miskiewicz wrote: > Hi, > > I have Tyan Thunder K8SRE S2891 mainboard, Transport GT24 B2891 1U > barebone system - 2 x dual core opteron 270, 6GB ram and Intel SRCU42= E > (PCI-E one) controller. > > The system has been set up (with kernel 2.6.16.23 SMP) and while comp= iling > kernel on it I got controller lockup. The problem is repeatable. > > I'm trying to compile 2.6.18rc3 + megaraid patches from mm kernel but= from > changelog it doesn't seem that there is some important fix for this c= ase. > > Any ideas? It's seems that the problem is solved now. The problem was due to broke= n=20 memory chip attached to intel srcu42e. Details here: http://www.intel.com/support/motherboards/server/srcu42e/sb/CS-023123.h= tm We got another srcu42e with memory from another manufacturer and it see= ms to=20 work properly. > megaraid driver, firmware and bios versions below: > > megaraid cmm: 2.20.2.6 (Release Date: Mon Mar 7 00:01:03 EST 2005) > megaraid: 2.20.4.7 (Release Date: Mon Nov 14 12:27:22 EST 2005) > megaraid: probe new device 0x1000:0x0408:0x8086:0x0002: bus 3:slot 14= :func > 0 ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19 > GSI 16 sharing vector 0xB1 and IRQ 16 > ACPI: PCI Interrupt 0000:03:0e.0[A] -> Link [LNK1] -> GSI 19 (level, = high) > -> IRQ 177 megaraid: fw version:[514P] bios version:[H431] > Losing some ticks... checking if CPU frequency changed. > scsi0 : LSI Logic MegaRAID driver > scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices > scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices > scsi[0]: scanning scsi channel 2 [virtual] for logical drives > Vendor: MegaRAID Model: LD 0 RAID5 280G Rev: 514P > Type: Direct-Access ANSI SCSI revision: 02 --=20 Arkadiusz Mi=B6kiewicz PLD/Linux Team arekm / maven.pl http://ftp.pld-linux.org/ - To unsubscribe from this list: send the line "unsubscribe linux-scsi" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html