From: Andrew Morton Subject: Re: cpufreq stops working after a while Date: Fri, 11 Aug 2006 11:46:31 -0700 Message-ID: <20060811114631.4a699667.akpm@osdl.org> References: <44DCCB96.5080801@rtr.ca> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <44DCCB96.5080801@rtr.ca> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org+glkc-cpufreq=m.gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" To: Mark Lord Cc: Linux Kernel , cpufreq@www.linux.org.uk On Fri, 11 Aug 2006 14:25:26 -0400 Mark Lord wrote: > One of my notebooks (Dell Latitude X1) has a 1.1GHz Pentium-M ULV processor. > This chip can change CPU speeds from 600 -> 800 -> 1100 Mhz. > > I use speedstep-centrino with it, and after boot all is usually okay. > But after a few hours of operation, it stops shifting to the highest frequency > even under continuous 100% load (or not). Eventually it gets stuck at 600Mhz > and stays there until I reboot. > > Sometimes rebooting doesn't even restore it. > > /sys/devices/system/cpu/cpu0/cpufreq is all very normal looking, > showing the available frequencies and other info. All of the attribs > there look fine, except for "scaling_max_freq", which is what seems > to gradually get set smaller. For instance, right now it is set to 800000, > and it won't let me change it (echo 11000000 > scaling_max_freq has no effect. > > WHY? cpufreq seems to have relatively frequent problems. > And how can I fix it? You could start by telling us which kernel versions are affected ;)