From: Frank Date: Thu, 7 Sep 2006 16:22:24 -0700 (PDT) Subject: [U-Boot-Users] uboot for TI DSP c6000 Message-ID: <20060907232224.48897.qmail@web32202.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de --- paul burrell wrote: > Frank, > What am I missing here? Sounds like you have some > experience, so could you > answer a couple of questions. > > First I should clarify a couple of things just in case I did > not communicate > them correctly. > > The target is a TI TMS320C6204. It is a DSP from TI using a > C64 core. It > is not one of the OMAPs with an embedded ARM. The normal GCC > compiler set > does not appear to support the C6000 process, but I just found > some > documentation indicating that might not be true. > > 1. So I went to the ELDK page (DENX). According to the > page, it only > supports PowerPC. I am going to download it and check, but > that is all I > see. I did see that they have ARM, PPC, and MIPS directories, > so it might > be more than PPC. > 2. So lets say it does support it, what toolchain should I be > looking at? > Version numbers would be nice. > > In the end, embedded linix is going to be more than what I > need. I am just > trying to have a simple bootloader with the ability to edit > memory, test > functions, program flash, and load over a serial port. I > don't even need > networking capability. > > Any advice would be great. > > Thanks, > Paul No, I missed something. I assumed you were working on the DM6446 with an ARM core and DSP and wanted to boot the board with the ARM. if that's not the case, then I am off base... __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com