From: johnpol@2ka.mipt.ru (Evgeniy Polyakov) Date: Mon, 11 Sep 2006 05:50:53 +0000 Subject: [lm-sensors] [PATCH] watchdog: add support for w83697hg chip Message-Id: <20060911055053.GB18907@2ka.mipt.ru> List-Id: References: <87fyf5jnkj.fsf@willow.rfc1149.net> <1157815525.6877.43.camel@localhost.localdomain> <20060909220256.d4486a4f.vsu@altlinux.ru> In-Reply-To: <20060909220256.d4486a4f.vsu@altlinux.ru> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Sergey Vlasov Cc: Alan Cox , Samuel Tardieu , Jim Cromie , linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org Hello. On Sat, Sep 09, 2006 at 10:02:56PM +0400, Sergey Vlasov (vsu at altlinux.ru) wrote: > I can find at least two attempts to fix the SuperIO problem: > > - a SuperIO subsystem proposed by Evgeniy Polyakov (cc'd); > > - a simple SuperIO locks coordinator proposed by Jim Cromie (also > cc'd; http://thread.gmane.org/gmane.linux.drivers.sensors/10052 - > can't find actual patches). > > However, the mainline kernel still does not have anything for proper > SuperIO access locking. I created SuperIO subsystem for soekris board initially. Later it was extended to support scx200/scx100 gpio (for w1 subsytem). There is support for acb(i2c) bus, GPIO, and some stub for other elements in pc8736x superIO chip. But I was told those days (about at least 1.5 years ago) in lm_sensors mail list that splitting all that functionality into separated modules is the way to go. As far as I recall pc8736x GPIO was added recently. Here is one of the implementations posted to lm_sensors@: http://archives.andrew.net.au/lm-sensors/msg27895.html And here is my drawing board with image of how it looks (just for pure interest) in my mind :) : http://tservice.net.ru/~s0mbre/old/?section=gallery&item=superio_design -- Evgeniy Polyakov