From: Bruno Ducrot Subject: Re: writing a cpufreq driver Date: Sat, 23 Sep 2006 18:13:11 +0200 Message-ID: <20060923161311.GV4945@poupinou.org> References: <20060921184833.GC1216@dbz.icequake.net> <20060922153948.GN4945@poupinou.org> <20060922160025.GA4459@dbz.icequake.net> <20060922160514.GQ4945@poupinou.org> <20060922161149.GC4459@dbz.icequake.net> <20060923150751.GR4945@poupinou.org> <20060923152144.GA15964@dbz.icequake.net> <20060923154442.GT4945@poupinou.org> <20060923160335.GB15964@dbz.icequake.net> Mime-Version: 1.0 Return-path: Content-Disposition: inline In-Reply-To: <20060923160335.GB15964@dbz.icequake.net> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=gmane.org+glkc-cpufreq=gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: Ryan Underwood Cc: Cpufreq@lists.linux.org.uk On Sat, Sep 23, 2006 at 11:03:36AM -0500, Ryan Underwood wrote: > > On Sat, Sep 23, 2006 at 05:44:42PM +0200, Bruno Ducrot wrote: > > > > > > But if it were using STPCLK, TSC would be slowed too, right? TSC just > > > counts the clock cycles of CPU. I was thinking the method was to enter > > > SMM and run HLT instructions or similar. That way power is saved but > > > TSC is preserved. Unfortunately, that makes the power saving mode on > > > this particular machine useless, since Linux already runs HLT during > > > idle. > > > > You are right. Maybe Toshiba implemented that: > > > > http://www.freepatentsonline.com/7082542.html > > Very good catch! > Of course, I never wrote toshiba can invalidate this patent by earlyer works... After all we are only speculating. -- Bruno Ducrot -- Which is worse: ignorance or apathy? -- Don't know. Don't care.