Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965117AbWI0QI3 (ORCPT ); Wed, 27 Sep 2006 12:08:29 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S965145AbWI0QI3 (ORCPT ); Wed, 27 Sep 2006 12:08:29 -0400 Received: from smtp1-g19.free.fr ([212.27.42.27]:33162 "EHLO smtp1-g19.free.fr") by vger.kernel.org with ESMTP id S965117AbWI0QI2 (ORCPT ); Wed, 27 Sep 2006 12:08:28 -0400 From: ygosset Organization: none To: linux-kernel@vger.kernel.org Subject: Help needed on 2.6.18, Irq and SATA controler. Date: Wed, 27 Sep 2006 18:08:04 +0200 User-Agent: KMail/1.8.2 MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-Id: <200609271808.04956.ygosset@free.fr> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Hello. I boot on an SATA drive, with this kernel:2.6.12-12mdk . Here is an lspci on my sata controler: " 01:08.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 50) Subsystem: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- [disabled] [size=64K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- .. 01:08.0 Class 0104: 1106:3149 (rev 50) .. I have tried to compile and install the latest kernel: 2.6.18, and I can't boot. I have found a little difference in log between this kernel: in 2.6.18, I haven't a line "PCI: Via IRQ fixup for 0000:01:08.0, from 11 to 0", I have this choice for the irq on 2.6.18: "sata_via(0000:01:08.0): routed to hard irq line 11" and after these errors: "ata 1.00 : qc timeout (cmd 0xec) .. ata 1: port is slow to respond Kernel panic ". I have this from the first kernel (v2.6.12) in syslog: "Sep 26 12:15:38 mybox kernel: PCI: Via IRQ fixup for 0000:01:08.0, from 11 to 0" "Sep 26 12:15:38 mybox kernel: sata_via(0000:01:08.0): routed to hard irq line 0" So, in the file quirks.c from 2.6.18 kernel, I have added this line " DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237_SATA, quirk_via_irq);" I have still the same error: Via IRQ fixup is applied but it is impossible to boot, even with append=" acpi=off pci=biosirq " in lilo.conf. Thanks! Yvan Gosset. -- ygosset@free.fr