From: ataschi@sms.at Subject: Re: powernow with kt133 Date: Thu, 28 Sep 2006 20:53:12 +0200 Message-ID: <20060928185312.B766D8450E@mail.sms.at> Mime-Version: 1.0 Content-Transfer-Encoding: quoted-printable Return-path: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: cpufreq-bounces@lists.linux.org.uk Errors-To: cpufreq-bounces+glkc-cpufreq=m.gmane.org+glkc-cpufreq=m.gmane.org@lists.linux.org.uk Content-Type: text/plain; charset="us-ascii" To: cpufreq@lists.linux.org.uk Hi all, got the hint, that this mailing list will have an answer .. could be,hm? so i forward my questions ... > I googled now for more than a week to find a solution for my freezing pr= oblem. > I used the VIA KT133 chipset on an MS-6330 (MSI K7T Pro 2-A) motherboard. > Immediatly after I press the enter key to load the powernow-k7 module (k= ernel 2.6.17) > everything is freezed. Even so fast that no log will be produced. > > My first assumption was: compatibilty problems of the modul with my AMD = Geode NX 1750. > -> no, definitly not > > second assumption: chipset problem, KT133 (and it's not the KT133A !) do= not support > powernow! But .. I found a report where exactly this chipset will be u= sed in a > Notebook > http://stupidius.dyndns.org/linux_on_maxdata_m-book/index.html > -> in this case PST tables are available > -> but on my desktop system they are not --> thus, I used your patch ;) > > third and last assumption: The MS-6330 does something weired or better, = doesn't handel > the FID signals or the FID_Change procedure in a correct way. Now, I'm= not sure if > this is a hardware problem or can be solved by software. > > My question: Do you know something about this stuff?? Can you help me? C= an help me > anyone? > > By the way: Do you know something about the VT8363 chipset register 55? = On KT133A it > seems, it will enable the chipset for powernow!!?? wbr armin -- Ein Service von http://www.sms.at