From: bilahari akkiraju Date: Tue, 3 Oct 2006 10:58:03 -0700 (PDT) Subject: [U-Boot-Users] Can I write to flash using mw command Message-ID: <20061003175803.6392.qmail@web33213.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hello, -> On my target board I have a spansion GL064M flash device. -> The flash base address is 0xff000000. -> I have read the data sheet for the device and noted down the erase and write command sequences for the device. -> I cannot erase, write to flash by implementing the appropriate command sequences with mw (memory write ) command provided by u-boot that came with my sdk (u-boot 1.1.4). For example For erasing sector 0xff000000 I typed the following sector erase command sequence (as per data sheet) at u-boot prompt mw.b 0xff000555 0xAA mw.b 0xff0002AA 0x55 mw.b 0xff000555 0x80 mw.b 0xff000555 0xAA mw.b 0xff0002AA 0x55 mw.b 0xff000000 0x30 For writing to address 0xff000000 I typed the following write command sequence (as per data sheet) at the u-boot prompt. mw.b 0xff000555 0xAA mw.b 0xff0002AA 0x55 mw.b 0xff000555 0xA0 mw.b 0xff000000 0x12 ; value 0x12 mw.b 0xff000001 0x34 ; value 0x34 mw.b 0xff000000 0xF0 ; reset (I do it as u-boot driver cfi_flash.c does it ) -> After doing all this , when I do a memory dump using md.b 0xff000000 , to my frustration I see that nothing at all has happend to the flash. I am sure I am missing something small or may be I am doing a completely wrong thing. I am more of a computer science guy and new to chip programming. Any suggestions, ideas or comments would be very helpful. Thanks you all Bilahari __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com