From: joe secund Date: Fri, 6 Oct 2006 13:59:02 -0700 (PDT) Subject: [U-Boot-Users] Re : MV64460 Burst reads from BootCS Message-ID: <20061006205902.16904.qmail@web54611.mail.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi Roel I've seen similar behavior using a MV64560 and power PC processor using a Windriver ICE. Basically I could not read the MV internal registers correctly when I did not plug in a bootrom (leaving empty socket). Was reading zeroes anywhere in memory. Somehow putting in even an empty Flash device allowed me to initialize the processor correctly and read/write MV registers and burn the flash via ICE. - Wim > ------------------------------ > > Message: 5 > Date: Sun, 1 Oct 2006 20:19:12 +0200 > From: "Roel Loeffen" > Subject: [U-Boot-Users] MV64460 Burst reads from BootCS > To: > Message-ID: > <7826EB01AD927140A1DCF898FE63325D0D91B1@Ex...> > Content-Type: text/plain; charset="iso-8859-1" > > Hi all, > > We discover some serious problems accessing flash at BootCS > of the Marvell MV64460. It looks like burst reads make the > whole bridge hang. >From inside U-Boot as well as using only > the BDI2000 debugger. > > Reading the flash with bursts enabled (which is default), > makes it sometimes impossible to access any > registers/dram/devices anymore, only zeros can be read. > > It also freezes the CPU somehow the debugger cannot halt it > anymore with a normal halt (COP halt), it has to use COP > freeze to take over control again. > > I cannot say this problem does not occur accessing other > spaces, so it can also be a problem at the PPC60x bus. > > Has anyone over excpirianced this before? > > Thanks in advance! > > Roel __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com