From: Tejun Heo Subject: [PATCH] libata: move ata_irq_on() into libata-sff.c Date: Mon, 9 Oct 2006 11:10:26 +0900 Message-ID: <20061009021026.GA10832@htj.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from py-out-1112.google.com ([64.233.166.178]:21444 "EHLO py-out-1112.google.com") by vger.kernel.org with ESMTP id S1751623AbWJICKi (ORCPT ); Sun, 8 Oct 2006 22:10:38 -0400 Received: by py-out-1112.google.com with SMTP id n25so2124656pyg for ; Sun, 08 Oct 2006 19:10:38 -0700 (PDT) Content-Disposition: inline Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Jeff Garzik , linux-ide@vger.kernel.org ata_irq_on() isn't used outside of libata core layer. The function is TF/SFF interface specific but currently used by core path with some hack too. Move it from include/linux/libata.h to drivers/ata/libata-sff.c. Signed-off-by: Tejun Heo --- drivers/ata/libata-sff.c | 29 +++++++++++++++++++++++++++++ drivers/ata/libata.h | 3 +++ include/linux/libata.h | 31 ------------------------------- 3 files changed, 32 insertions(+), 31 deletions(-) Index: work/drivers/ata/libata-sff.c =================================================================== --- work.orig/drivers/ata/libata-sff.c +++ work/drivers/ata/libata-sff.c @@ -39,6 +39,35 @@ #include "libata.h" /** + * ata_irq_on - Enable interrupts on a port. + * @ap: Port on which interrupts are enabled. + * + * Enable interrupts on a legacy IDE device using MMIO or PIO, + * wait for idle, clear any pending interrupts. + * + * LOCKING: + * Inherited from caller. + */ +u8 ata_irq_on(struct ata_port *ap) +{ + struct ata_ioports *ioaddr = &ap->ioaddr; + u8 tmp; + + ap->ctl &= ~ATA_NIEN; + ap->last_ctl = ap->ctl; + + if (ap->flags & ATA_FLAG_MMIO) + writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); + else + outb(ap->ctl, ioaddr->ctl_addr); + tmp = ata_wait_idle(ap); + + ap->ops->irq_clear(ap); + + return tmp; +} + +/** * ata_tf_load_pio - send taskfile registers to host controller * @ap: Port to which output is sent * @tf: ATA taskfile register set Index: work/drivers/ata/libata.h =================================================================== --- work.orig/drivers/ata/libata.h +++ work/drivers/ata/libata.h @@ -119,4 +119,7 @@ extern void ata_scsi_error(struct Scsi_H extern void ata_port_wait_eh(struct ata_port *ap); extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc); +/* libata-sff.c */ +extern u8 ata_irq_on(struct ata_port *ap); + #endif /* __LIBATA_H__ */ Index: work/include/linux/libata.h =================================================================== --- work.orig/include/linux/libata.h +++ work/include/linux/libata.h @@ -1148,37 +1148,6 @@ static inline void ata_qc_reinit(struct } /** - * ata_irq_on - Enable interrupts on a port. - * @ap: Port on which interrupts are enabled. - * - * Enable interrupts on a legacy IDE device using MMIO or PIO, - * wait for idle, clear any pending interrupts. - * - * LOCKING: - * Inherited from caller. - */ - -static inline u8 ata_irq_on(struct ata_port *ap) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 tmp; - - ap->ctl &= ~ATA_NIEN; - ap->last_ctl = ap->ctl; - - if (ap->flags & ATA_FLAG_MMIO) - writeb(ap->ctl, (void __iomem *) ioaddr->ctl_addr); - else - outb(ap->ctl, ioaddr->ctl_addr); - tmp = ata_wait_idle(ap); - - ap->ops->irq_clear(ap); - - return tmp; -} - - -/** * ata_irq_ack - Acknowledge a device interrupt. * @ap: Port on which interrupts are enabled. *