From: thien van Date: Wed, 1 Nov 2006 00:01:13 -0800 (PST) Subject: [U-Boot-Users] How to use UBoot for S3CEB2410 board Message-ID: <20061101080113.16749.qmail@web31403.mail.mud.yahoo.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: u-boot@lists.denx.de Hi all, I have bought a board at http://armkits.com/Product/s3ceb2410.asp and I am trying to use uboot to boot it from SMC card, Here are the steps I did: [root at nvthien u-boot-1.1.5]# make smdk2410_config Configuring for smdk2410 board... [root at nvthien u-boot-1.1.5]# make CROSS_COMPILE=arm-linux- ... -Map u-boot.map -o u-boot arm-linux-objcopy --gap-fill=0xff -O srec u-boot u-boot.srec arm-linux-objcopy --gap-fill=0xff -O binary u-boot u-boot.bin [root at nvthien u-boot-1.1.5]# ls -al u-boot* -rwxr-xr-x 1 root root 584411 Oct 26 14:48 u-boot -rwxr-xr-x 1 root root 96596 Oct 26 14:48 u-boot.bin -rw-r--r-- 1 root root 79941 Oct 26 14:48 u-boot.map -rwxr-xr-x 1 root root 289882 Oct 26 14:48 u-boot.srec [root at nvthien u-boot-1.1.5]# After that I use Dnw program to down load u-boot.bin file at 0x30100000, and download & run at 0x30000000 file NandFlash_WR to write u-boot.bin to SMC: ... Download&Run is selected. USB host is connected. Waiting a download. Now, Downloading [ADDRESS:30000000h,TOTAL:25234] RECEIVED FILE SIZE: 25234(312.3KB/S,0.1S) Now, Checksum calculation Download O.K. S3C2410 Test Program Ver 0.00 FCLK=200000000 0:NAND View Badblk 1:NAND View page 2:NAND Program 3:NAND Erase All Select the function to test?2 [SMC(K9S1208V0M) NAND Flash writing program] the data must be downloaded using ICE from 30100000h Source size:0h~0h Available target block number: 0~4095 Input target block number:0 Input target size(0x4000*n):96606 source base address(0x3010000x)=0x30100000 target start block number =0 target size (0x4000*n) =0x1795e ............................................................................................................................................................................................ And I reset the board to boot from UBoot but it does not work.????. Please help me how to use it. Thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.denx.de/pipermail/u-boot/attachments/20061101/658e229d/attachment.htm