From: Tejun Heo Subject: [PATCH 2/2 UPDATED] libata: make sure IRQ is cleared after ata_bmdma_freeze() Date: Fri, 17 Nov 2006 12:24:22 +0900 Message-ID: <20061117032422.GF2184@htj.dyndns.org> References: <20061117030621.GD2184@htj.dyndns.org> <20061117030750.GE2184@htj.dyndns.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from nf-out-0910.google.com ([64.233.182.191]:51572 "EHLO nf-out-0910.google.com") by vger.kernel.org with ESMTP id S1424650AbWKQDYb (ORCPT ); Thu, 16 Nov 2006 22:24:31 -0500 Received: by nf-out-0910.google.com with SMTP id o25so1207563nfa for ; Thu, 16 Nov 2006 19:24:30 -0800 (PST) Content-Disposition: inline In-Reply-To: <20061117030750.GE2184@htj.dyndns.org> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Jeff Garzik , linux-ide@vger.kernel.org Now that BMDMA status is recorded in irq handler. ata_bmdma_freeze() is free to manipulate host status. Under certain circumstances, some controllers (ICH7 in enhanced mode w/ IRQ shared) raise IRQ when CTL register is written to and ATA_NIEN doesn't mask it. This patch makes ata_bmdma_freeze() clear all pending IRQs after freezing a port. This change makes explicit clearing in ata_device_add() unnecessary and thus kills it. The removed code was SFF-specific and was in the wrong place. Note that ->freeze() handler is always called under ap->lock held and irq disabled. Even if CTL manipulation causes stuck IRQ, it's cleared immediately. This should be safe (enough) even in SMP environment. More correct solution is to mask the IRQ from IRQ controller but that would be an overkill. Signed-off-by: Tejun Heo --- The original comment didn't really explain what's going on. Updated w/ better comment. drivers/ata/libata-core.c | 5 ++--- drivers/ata/libata-sff.c | 8 ++++++++ 2 files changed, 10 insertions(+), 3 deletions(-) Index: work/drivers/ata/libata-core.c =================================================================== --- work.orig/drivers/ata/libata-core.c +++ work/drivers/ata/libata-core.c @@ -5606,9 +5606,8 @@ int ata_device_add(const struct ata_prob ap->ioaddr.bmdma_addr, irq_line); - ata_chk_status(ap); - host->ops->irq_clear(ap); - ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */ + /* freeze port before requesting IRQ */ + ata_eh_freeze_port(ap); } /* obtain irq, that may be shared between channels */ Index: work/drivers/ata/libata-sff.c =================================================================== --- work.orig/drivers/ata/libata-sff.c +++ work/drivers/ata/libata-sff.c @@ -700,6 +700,14 @@ void ata_bmdma_freeze(struct ata_port *a writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr); else outb(ap->ctl, ioaddr->ctl_addr); + + /* Under certain circumstances, some controllers raise IRQ on + * ATA_NIEN manipulation. Also, many controllers fail to mask + * previously pending IRQ on ATA_NIEN assertion. Clear it. + */ + ata_chk_status(ap); + + ap->ops->irq_clear(ap); } /**