From: Randy Dunlap Subject: [PATCH] ata/kconfig: Re: Why SCSI module needed for PCI-IDE ATA only disks ? Date: Tue, 5 Dec 2006 19:54:27 -0800 Message-ID: <20061205195427.b5c44f83.randy.dunlap@oracle.com> References: <45761B2F.9060804@shaw.ca> <457625CF.2080105@comcast.net> <45762781.8020207@shaw.ca> <45762F1E.4030805@comcast.net> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: Received: from agminet01.oracle.com ([141.146.126.228]:40322 "EHLO agminet01.oracle.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759896AbWLFDxt (ORCPT ); Tue, 5 Dec 2006 22:53:49 -0500 In-Reply-To: <45762F1E.4030805@comcast.net> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: Ed Sweetman , jgarzik , ide Cc: Robert Hancock , linux-kernel On Tue, 05 Dec 2006 21:46:54 -0500 Ed Sweetman wrote: -ETOOMANYWORDS && -ENOPATCH, so here is one to consider. Help text can also be added. This is similar to what USB storage already does. --- From: Randy Dunlap Provide more clues about SCSI config options that are needed for libata (SATA/PATA) drivers. Signed-off-by: Randy Dunlap --- drivers/ata/Kconfig | 9 +++++++++ 1 file changed, 9 insertions(+) --- linux-2.6.19-git7.orig/drivers/ata/Kconfig +++ linux-2.6.19-git7/drivers/ata/Kconfig @@ -17,6 +17,15 @@ config ATA that "speaks" the ATA protocol, also called ATA controller), because you will be asked for it. +comment "NOTE: ATA enables basic SCSI support; *however*," + depends on ATA +comment "+ 'SCSI disk support', 'SCSI tape support', or '" + depends on ATA +comment "+ 'SCSI CDROM support' may also be needed," + depends on ATA +comment "+ depending on your hardware configuration." + depends on ATA + if ATA config SATA_AHCI