Return-Path: Received: from mail.dev.rtsoft.ru (unknown [85.21.88.2]) by ozlabs.org (Postfix) with SMTP id 84658DDEC0 for ; Wed, 20 Dec 2006 02:44:12 +1100 (EST) Date: Tue, 19 Dec 2006 18:44:25 +0300 From: Vitaly Wool To: Paul Mackerras Subject: [PATCH][trivial][respin] update MTD OF documentation Message-Id: <20061219184425.d924c4c2.vitalywool@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Cc: linuxppc-dev@ozlabs.org, dwmw2@redhat.com List-Id: Linux on PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hello folks, the patch below updates the Documentation/powerpc part of the MTD OF implementation with the new field probe-type. Its support has already been implemented in MTD part (drivers/mtd/maps/physmap_of.c). Documentation/powerpc/booting-without-of.txt | 19 +++++++++++-------- 1 files changed, 11 insertions(+), 8 deletions(-) Signed-off-by: Vitaly Wool diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index b3bd366..3399427 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1703,29 +1703,32 @@ platforms are moved over to use the flat Required properties: - device_type : has to be "rom" - - compatible : Should specify what this ROM device is compatible with - (i.e. "onenand"). Currently, this is most likely to be "direct-mapped" - (which corresponds to the MTD physmap mapping driver). - - regs : Offset and length of the register set (or memory mapping) for + - compatible : Should specify what this flash device is compatible with. + Currently, this is most likely to be "direct-mapped" (which + corresponds to the MTD physmap mapping driver). + - reg : Offset and length of the register set (or memory mapping) for the device. + - bank-width : Width of the flash data bus in bytes. Required + for the NOR flashes (compatible == "direct-mapped" and others) ONLY. Recommended properties : - - bank-width : Width of the flash data bus in bytes. Required - for the NOR flashes (compatible == "direct-mapped" and others) ONLY. - partitions : Several pairs of 32-bit values where the first value is partition's offset from the start of the device and the second one is partition size in bytes with LSB used to signify a read only - partititon (so, the parition size should always be an even number). + partition (so, the parition size should always be an even number). - partition-names : The list of concatenated zero terminated strings representing the partition names. + - probe-type : The type of probe which should be done for the chip + (JEDEC vs CFI actually). Valid ONLY for NOR flashes. Example: flash@ff000000 { device_type = "rom"; compatible = "direct-mapped"; - regs = ; + probe-type = "CFI"; + reg = ; bank-width = <4>; partitions = <00000000 00f80000 00f80000 00080001>;