From: Rafal Maszkowski Subject: HDA Intel on V3505 Date: Wed, 10 Jan 2007 00:10:49 +0100 Message-ID: <20070109231049.GW2271@delta.icm.edu.pl> Mime-Version: 1.0 Content-Type: text/plain; charset="iso-8859-2" Content-Transfer-Encoding: quoted-printable Return-path: Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: alsa-devel-bounces@lists.sourceforge.net Errors-To: alsa-devel-bounces@lists.sourceforge.net To: alsa-devel@lists.sourceforge.net List-Id: alsa-devel@alsa-project.org I use Fujitsu-Siemens Amilo Pro V3505 with = 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definitio= n Audio Controller (rev 02) It has two codecs: Codec: Realtek ALC861 Codec: Motorola Si3054 Vendor Id: 0x10573055 (a half-modem really). I started with kernel-2.6.18-1.2869.fc6 of Fedora 6 (alsa 1.0.12). I was ab= le to play sound but input, recording and modem were not working properly (modem was not vis= ible at all). With recent hg sources all this works as follows: MODEM: rzm@rzm-ab:~,0# cat /proc/asound/card0/codec#1 Codec: Motorola Si3054 Address: 1 Vendor Id: 0x10573055 Subsystem Id: 0x10573055 Revision Id: 0x100700 rzm@rzm-ab:~,0# modprobe snd-intel8x0m rzm@rzm-ab:~,1# /root/V3505/dead-end/slmodem-2.9.11-20061021/modem/slmodemd= -a -c POLAND -d 4 modem:0 SmartLink Soft Modem: version 2.9.11 Jan 6 2007 19:21:07 <478.906438> SmartLink Soft Modem: version 2.9.11 Jan 6 2007 19:21:07 <478.906494> modem:0: startup modem... <478.906814> modem:0: update termios... symbolic link `/dev/ttySL0' -> `/dev/pts/5' created. modem `modem:0' created. TTY is `/dev/pts/5' <478.908339> open file: /var/lib/slmodem/data.modem:0... <478.965975> main: rt applyed: SCHED_FIFO, pri 99 Use `/dev/ttySL0' as modem device, Ctrl+C for termination. <519.422951> main: termios changed. <519.422981> modem:0: update termios... <535.201913> modem:0: run cmd: atdt0w202122 <535.201947> modem:0: modem dial: t0w202122... <535.201961> modem:0: modem_dial_start... <535.201974> call: create... <535.201992> CallProgFP_Create >> <535.202004> APPLY_FILTER =3D 0 <535.202018> Detection Thresholds: levle_fix=3D45,--> LEVEL_THRESHOLD=3D90 <535.202032> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D> 0 <535.202044> Cadence: Busy Tone loose detection is 0 <535.202059> TYPE BUSY <535.202071> Filter index 0 <535.202082> Filter SubIndex 0 <535.202094> MAX_ON_TIME 30 Buffers MIN_ON_TIME 5 Buffers <535.202106> MAX_OFF_TIME 30 Buffers MIN_OFF_TIME 5 Buffers <535.202119> OFF_TIME_THAT_RESETS_CYCLE 90 <535.202131> BUFFER LENGTH 160 samples. <535.202143> INTEGRATION_LENGTH 0[ms] <535.202155> LEVEL 90 <535.202171> INTEGRATION_TIME =3D 0 Buffers. <535.202185> Detection Thresholds: levle_fix=3D45,--> LEVEL_THRESHOLD=3D90 <535.202200> TYPE DIAL <535.202211> Filter index 5 <535.202223> Filter SubIndex 0 <535.202234> MAX_ON_TIME 0 Buffers MIN_ON_TIME 0 Buffers <535.202246> MAX_OFF_TIME 0 Buffers MIN_OFF_TIME 0 Buffers <535.202259> OFF_TIME_THAT_RESETS_CYCLE 0 <535.202271> BUFFER LENGTH 666 samples. <535.202283> INTEGRATION_LENGTH 800[ms] <535.202294> LEVEL 90 <535.202308> INTEGRATION_TIME =3D 8 Buffers. <535.202323> CALLPROG Create << <535.202335> CALLPROG Dialing t0w202122 <535.202348> Configuration->tone_DigitLength 100 <535.202360> Configuration->pulse_OffHookTime 33 <535.202372> Configuration->pulse_OnHookTime 67 <535.202384> Configuration->dialPauseTime 4 <535.202396> Configuration->flashTime 9 <535.202408> Configuration->toneOrPulseFlag 0 <535.202420> Configuration->dialModifierValidationFlag 1 <535.202432> Configuration->ABCD_PermittedFlag 0 <535.202444> Configuration->pulseAndToneInSameStringPermittedFlag 0 <535.202456> Configuration->callingToneFlag 0 <535.202468> Configuration->commaPauseDurLimit 30 <535.202480> Configuration->digitPattern 1 <535.202492> Configuration->tone_BetweenDigitsInterval 100 <535.202504> Configuration->pulse_BetweenDigitsInterval 800 <535.202516> DTMF_Gain1 =3D 13014 <535.202528> DTMF_Gain2 =3D 16384 <535.202541> AnalyzeDialString: Updated 17 May 1999 00:50 <535.202553> AnalyzeDialString: LAST_DIALABLE_SYMBOL is 8 <535.202565> Dial String Syntax is VALID <535.202580> GetNoAnswerTimeOut. 60 <535.202593> WAIT DIAL TIMEOUT =3D 4 <535.202605> CALLPROG_Dial was exited. <535.202616> call: create RC: 9600 <-> 8000... <535.202633> modem:0: modem_start.. <535.202645> modem:0: modem set state: 1 --> 2... <535.202659> modem:0: new state: DP_ESTAB <535.202672> main: alsa_ioctl: cmd 8, arg 3... <535.202685> modem:0: modem set hook: 0 --> 1... <535.202697> main: alsa_ioctl: cmd 2, arg 1... <535.203833> main: alsa_ioctl: cmd 11, arg 0... <535.204067> main: alsa_ioctl: cmd 4, arg 2580... <535.204084> main: alsa_ioctl: cmd 7, arg 30... <535.204097> main: alsa_start... error: cannot setup hw params for playback: Invalid argument <535.205906> err: modem:0: modem start =3D -22: cannot start device. <535.205922> modem:0: modem_stop.. <535.205934> modem:0: modem set hook: 1 --> 0... <535.205947> main: alsa_ioctl: cmd 2, arg 0... <535.207825> main: alsa_ioctl: cmd 8, arg 0... <535.207846> call: delete... <535.207860> Dialer was aborted. <535.207871> CALLPROG_Delete is entered <535.207883> cadence_delete with CADENCE_DIAL_OBJ is invoked <535.207896> cadence_delete with CADENCE_OBJ is invoked <535.207908> CALLPROG_Delete is exited <535.207922> modem:0: modem set state: 2 --> 1... <535.207936> modem:0: new state: MODEM_IDLE <535.207948> modem:0: modem report result: 3 (NO CARRIER) <535.207976> modem:0: modem report result: 4 (ERROR) <544.892326> main: termios changed. <544.892355> modem:0: update termios... <544.892382> main: pty closed. The above log shows an attempt to dial: rzm@rzm-ab:~,0# cu -l /dev/ttySL0 -s 115200 Connected. atdt0w202122 NO CARRIER ERROR ~. Disconnected. dmesg shows: ALSA /usr/src/sound/hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_in= tel.c:1153: hda-intel: invalid format_val, rate=3D9600, ch=3D1, format=3D2 SOUND: dmesg: hda_codec: Unknown model for ALC861, trying auto-probe from BIOS... ALSA /usr/src/sound/hg/alsa-driver/pci/hda/../../alsa-kernel/pci/hda/hda_in= tel.c:556: hda_intel: azx_get_response timeout, switching to polling mode... alsamixer: +---------------------------------------------------[AlsaMixer v1.0.12 (Pre= ss Escape to quit)]----------------------------------------------------+ | Card: HDA Intel = | | Chip: Realtek ALC861 = | | View: Playback Capture [All] = | | Item: Capture [dB gain=3D-6.00, -6.00] = | ... | +--+ +--+ +--+= | ... | +--+ +--+ +--+ +--+= +--+ Mic +--+ | | |OO| |MM| |MM| = |MM| |MM| | | +--+ +--+ +--+ L = R +--+ +--+ | | CAPTU= R | | 0<>0 0<>0 0<>0= | | Front Front Mi Mic Caller I Input So Off-hook | ... +--------------------------------------------------------------------------= -----------------------------------------------------------------------+ There is no PCM slider. The other possible input source is Front Mic. Playing works. Recording works - I have not checked yet what is really recorded. Listening to the sounds coming from the input: THe line input and built in microphone are mixed. Volume of this mixture can be regulated with Front Mi= c or Mic regulation. Each of them takes over the level, i.e. when one of them is= set to lower level setting the other set the sound level. When the second one is left at high level moving the first even slightly sets the level (to this l= ower value). rzm@rzm-ab:~,0# cat /proc/asound/card0/codec#0 Codec: Realtek ALC861 Address: 0 Vendor Id: 0x10ec0861 Subsystem Id: 0x17c01205 Revision Id: 0x100300 Default PCM: rates [0x140]: 48000 96000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Power: 0x0 Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x80 0x80] Power: 0x0 Node 0x05 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x80 0x80] Power: 0x0 Node 0x06 [Audio Output] wcaps 0x405: Stereo Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x80 0x80] Power: 0x0 Node 0x07 [Audio Output] wcaps 0x605: Stereo Digital Amp-Out Amp-Out caps: N/A Amp-Out vals: [0x00 0x00] Power: 0x0 Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In Amp-In caps: ofs=3D0x02, nsteps=3D0x0d, stepsize=3D0x0b, mute=3D1 Amp-In vals: [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00] [0x00 0x00]= [0x00 0x00] PCM: rates [0x140]: 48000 96000 bits [0x2]: 16 formats [0x1]: PCM Power: 0x0 Connection: 6 = 0x0d* 0x0c 0x0f 0x10 0x11 0x15 Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x0b [Pin Complex] wcaps 0x400581: Stereo Pincap 0x081f: OUT HP Detect Pin Default 0x01014110: [Jack] Line Out at Ext Rear Conn =3D 1/8, Color =3D Green Pin-ctls: 0x40: OUT Power: 0x0 Connection: 1 = 0x16 Node 0x0c [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0837: IN OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn =3D 1/8, Color =3D Black Pin-ctls: 0x20: IN Power: 0x0 Connection: 1 = 0x19 Node 0x0d [Pin Complex] wcaps 0x400581: Stereo Pincap 0x08337: IN OUT Detect Pin Default 0x01a19c2e: [Jack] Mic at Ext Rear Conn =3D 1/8, Color =3D Pink Pin-ctls: 0x24: IN Power: 0x0 Connection: 1 = 0x18 Node 0x0e [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0817: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn =3D 1/8, Color =3D Black Pin-ctls: 0x40: OUT Power: 0x0 Connection: 1 = 0x19 Node 0x0f [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0833f: IN OUT HP Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn =3D 1/8, Color =3D Black Pin-ctls: 0x40: OUT Power: 0x0 Connection: 1 = 0x1a Node 0x10 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0833f: IN OUT HP Detect Pin Default 0x99a30120: [Fixed] Mic at Int ATAPI Conn =3D ATAPI, Color =3D Unknown Pin-ctls: 0x24: IN Power: 0x0 Connection: 1 = 0x1b Node 0x11 [Pin Complex] wcaps 0x400001: Stereo Pincap 0x0863: IN Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn =3D 1/8, Color =3D Black Pin-ctls: 0x00: Node 0x12 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x0810: OUT Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn =3D 1/8, Color =3D Black Pin-ctls: 0x40: OUT Connection: 1 = 0x07 Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x14 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 = 0x0d 0x10 = Node 0x15 [Audio Mixer] wcaps 0x20050f: Stereo Amp-In Amp-Out Amp-In caps: ofs=3D0x0c, nsteps=3D0x17, stepsize=3D0x0b, mute=3D1 Amp-In vals: [0x00 0x00] [0x80 0x80] [0x00 0x00] Amp-Out caps: ofs=3D0x0c, nsteps=3D0x0c, stepsize=3D0x0b, mute=3D1 Amp-Out vals: [0x0c 0x0c] Power: 0x0 Connection: 3 = 0x11 0x14 0x1c Node 0x16 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 = 0x03 0x15 = Node 0x17 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 = 0x04 0x15 = Node 0x18 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 = 0x05 0x15 = Node 0x19 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 = 0x06 0x15 = Node 0x1a [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00] Connection: 4 = 0x04 0x06 0x15 0x03 Node 0x1b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x80 0x80] [0x80 0x80] [0x00 0x00] [0x00 0x00] Connection: 4 = 0x04 0x06 0x15 0x03 Node 0x1c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In Amp-In caps: ofs=3D0x00, nsteps=3D0x00, stepsize=3D0x00, mute=3D1 Amp-In vals: [0x00 0x00] [0x00 0x00] Connection: 2 = 0x0c 0x0f = Node 0x1d [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1e [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x1f [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0817: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn =3D 1/8, Color =3D Black Pin-ctls: 0x40: OUT Power: 0x0 Connection: 1 = 0x18 Node 0x20 [Pin Complex] wcaps 0x400581: Stereo Pincap 0x0817: OUT Detect Pin Default 0x411111f0: [N/A] Speaker at Ext Rear Conn =3D 1/8, Color =3D Black Pin-ctls: 0x40: OUT Power: 0x0 Connection: 1 = 0x17 Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono Node 0x23 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out Amp-Out caps: ofs=3D0x0f, nsteps=3D0x0f, stepsize=3D0x0b, mute=3D1 Amp-Out vals: [0x8f] R. -- = Je=BFeli upadnie cywilizacja zachodnia, to b=EAdzie szansa na odbudow=EA cy= wilizacji chrze=B6cija=F1skiej. (dr Stanis=B3aw Krajski, Radio Maryja, 10 X 200= 1) ------------------------------------------------------------------------- Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT & business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE= VDEV