From: Andrew Walrond Date: Fri, 23 Feb 2007 11:08:10 +0000 Subject: (Sparc64) 2.6.20 seems to ignore initramfs Message-Id: <200702231108.10185.andrew@walrond.org> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: sparclinux@vger.kernel.org Cc: linux-kernel@vger.kernel.org On a Sun T1000 I am trying to boot 2.6.20 using initramfs. (I use the same procedure successfully on x86_64 and itanium2 servers). The relevent silo section looks like this: image=/boot/2.6.20.image label=2.6.20 initrd=/boot/2.6.20.initramfs partition=2 read-only The kernel loads and boots and I see Allocated 8 Megs of memory at 0x40000000 for kernel Loaded kernel version 2.6.20 Loading initial ramdisk (127932430 bytes at 0x1000000 phys, 0x40C00000 virt)... / Remapping the kernel... done. Booting Linux... PROMLIB: Sun IEEE Boot Prom 'OBP 4.23.0 2006/06/02 16:14' PROMLIB: Root node compatible: sun4v Linux version 2.6.20 (nobody@spawn1.secure) (gcc version 4.1.1) #1 SMP Thu Feb 22 16:25:18 GMT 2007 ARCH: SUN4V Ethernet address: 00:14:4f:2a:90:92 PROM: Built device tree with 65903 bytes of memory. Built 1 zonelists. Total pages: 242541 Kernel command line: ro [snip] checking if image is initramfs... it is Freeing initrd memory: 124934k freed [snip] VFS: Cannot open root device "" or unknown-block(0,0) Please append a correct "root=" boot option Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) <0>Press Stop-A (L1-A) to return to the boot prom So it knows about the initramfs, but then tries to mount a root filesystem instead... I haven't tried this (initramfs) with earlier kernels, so I don't know whether this is a regression. Any clues about how to solve this would be greatly appreciated. Andrew Walrond