From: Charles Price Date: Tue, 27 Feb 2007 11:20:01 +0000 Subject: [LARTC] Creating a contended section of bandwidth with HTB and IMQ Message-Id: <200702271120.02584.cpwp@w3z.co.uk> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi All, I'm trying to create a contended section of bandwidth using IMQ. I have the imq0 device up and running, with traffic passing through it. Firstly, I need to throttle the entire device imq0 to 2mbit/s. I would then like to add throttle rules for individual IP addresses, allowing them to pass up to 512kbit/s each, as long as imq0 has not reached its 2mbit/s. The configuration I currently have is as follows: tc qdisc add dev imq0 root handle 1: htb default 1 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k # IP 10.0.0.10 tc class add dev imq0 parent 1:1 classid 1:10 htb rate 512kbit tc qdisc add dev imq0 parent 10 handle 10: sfq tc filter add dev imq0 protocol ip parent 1: prio 10 u32 \ match ip src 10.0.0.10/32 flowid 1:10 # IP 10.0.0.20 tc class add dev imq0 parent 1:1 classid 1:20 htb rate 512kbit tc qdisc add dev imq0 parent 20 handle 20: sfq tc filter add dev imq0 protocol ip parent 1: prio 20 u32 \ match ip src 10.0.0.20/32 flowid 1:20 Both IP addresses (10.0.0.10 and 10.0.0.20) aquire their 512kbit/s without problem. However, when I add more classes like the ones above and pass plently of traffic, each IP address still obtains its full 512kbit/s - regardless of the 2mbit/s limit in the root class. Is there a way to achieve this? Thanks in advance, Charlie _______________________________________________ LARTC mailing list LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc